User`s guide

5
The Front Panel
1. INPUT: Use this jack to connect your
guitar to the amplifier using a high-quality
shielded instrument cable.
2. VOLUME: Use this to adjust the output
level.
3. TREBLE: Use this to adjust the output
level of the high frequencies. The adjust-
ment range is 20 dB at 10 kHz.
4. MIDDLE: Use this to adjust the output
level of the mid frequencies. The adjust-
ment range is 7 dB at 1 kHz.
5. BASS: Use this to adjust the output
level of the low frequencies. The adjust-
ment range is 11 dB at 100 Hz.
6. Indicator Lamp: This illuminates when
the amplifier is turned on (power, that
is).
7. 5 WATTS/3 WATTS: This is the
Pentode/Triode switch. It allows you
to operate the amplifier in two distinct
modes of operation and output power
rating. The Pentode is the aggressive
setting that gives you full output power
of 5 watts rms. The Triode is a gentler
setting with more head room that reduc-
es the output power to 3 watts rms.
8. ON/OFF SWITCH: Use this switch to
turn the amplifier on and off.
VOLUME
5 WATTS ON
3 WATTS OFF
TREBLE MIDDLE BASS
INPUT
L
I
T
T
L
E
G
I
A
N
T
010
010 010 010
1 2 3 5 6 7 84