User manual

The third alternative schedules bursts of 24 pairs at 1 hour intervals every 5 days
(48 single profiles at 30 minute intervals would provide almost the same coverage). The duration
to the file system limit is 4.5 months. This approach provides regular coverage at a relatively
high sample rate, almost certainly high enough to resolve the target processes. The 4.5 month
duration offers some flexibility for turn-around and recovery scheduling and provides protection
from weather and ship delays.
Evaluate the
schedule
4.5 month
duration
Start 1| Countdown delay = 12:00:00 [HH:MM:SS]
Schedule 2| Pair start interval = 000 01:00:00 [DDD HH:MM:SS]
3| Reference date/time = 04/10/2002 00:00:00
4| Burst interval = 005 00:00:00 [DDD HH:MM:SS]
5| Pairs per burst = 24
6| Paired profiles Enabled
Stops 7| Shallow pressure = 25.0 [dbar]
8| Deep pressure = 200.0 [dbar]
9| Shallow error = 50.0 [dbar]
A| Deep error = 25.0 [dbar]
B| Profile time limit = 00:14:35 [HH:MM:SS]
C| Stop check interval = 10 [sec]
D| Done
Selection ? d
Checking entries . . . done.
All entries are within allowed ranges.
Checking profile schedule . . . done.
Calculated minimum profile pair duration: 00:34:28
Profile schedule selections are consistent.
Checking burst schedule . . . done.
Calculated burst duration: 001 00:00:00
Burst schedule selections are consistent.
Estimated Profile 1 start time: 04/10/2002 00:00:00
Profiling distance will reach 1 million meters
on 11/26/2003 after 5714 profiles.
Deployment is limited to 1362 profiles
and will end on 08/29/2002.
Accept and store schedule selections (Yes/No) [Y] ?
Figure C-26: Four and ½ Month Duration Settings
Appendix C-28