User manual

Sample File
The sample shown next illustrates a display for a single profile (Profile 3) when ‘Single
Profile’ and ‘All data files’ are selected. This example shows the Profile data with the FSI CTD
and ACM installed.
First stop
check after
velocity ramp
<D> Deployment
<L> Logging files
<M> Main menu
Select data files to download:
<2> Engineering data files only
profile 3 of 560.
11/24/2004 14:00:07 129 11.9 0.000 99.00 99 99.00 99
11/24/2004 14:00:15 253 11.7 0.000 99.00 99 99.00 99
Engineering
data
Sensor and
motion start
times
System logs
0.000 for
pressure during
velocity ramp,
CTD not
queried
Velocity ramp
and profile exit
conditions
Sensor and
motion stop
times
Stream serial data from:
<S> Single profile
<R> Range of profiles
Exit to:
Selection ? S
<1> All data files
<3> CTD data files only
<4> ACM data files only
Selection ? 1
Enter ID# of profile to be read: (0 to 560) ? 3
Profile 3
ENGINEERING DATA
________________
Opening file E0000000.dat, engineering data for
Profile 3
Sensors were turned on at 11/24/2004 13:58:20
Vehicle began profiling at 11/24/2004 14:00:01
Date Time [mA] [V] [dbar] Fluor[mV] Gain Turb[mV] Gain
11/24/2004 14:00:03 81 12.0 0.000 99.00 99 99.00 99
11/24/2004 14:00:11 222 11.8 0.000 99.00 99 99.00 99
11/24/2004 14:00:19 238 11.7 0.000 99.00 99 99.00 99
11/24/2004 14:00:23 215 11.8 0.000 99.00 99 99.00 99
11/24/2004 14:00:27 221 11.8 0.000 99.00 99 99.00 99
11/24/2004 14:00:31 220 11.8 0.000 99.00 99 99.00 99
11/24/2004 14:00:34 199 11.8 8.002 99.00 99 99.00 99
11/24/2004 14:00:38 192 11.8 6.829 99.00 99 99.00 99
11/24/2004 14:00:42 183 11.8 5.965 99.00 99 99.00 99
11/24/2004 14:00:46 172 11.8 4.730 99.00 99 99.00 99
11/24/2004 14:00:50 160 11.8 3.489 99.00 99 99.00 99
Ramp exit: SMOOTH RUNNING
Profile exit: TOP PRESSURE
Vehicle motion stopped at 11/24/2004 14:00:53
Sensor logging stopped at 11/24/2004 14:02:55
Figure G-59: Stream Serial Data From Single Profile
G-61