Specifications

1400 Ferguson Avenue • St. Louis, MO 63133

P/N 47-099-02 • 08/01

CRATE

TECHNICAL SPECIFICATIONS

OUTPUT POWER RATING 50W RMS @ 10% THD, 4 ohms, 13.6VDC in

INPUT IMPEDANCE 1M ohm

MAXIMUM SIGNAL ACCEPTED

Mic Low Z 2V peak to peak

Mic Hi Z 12V peak to peak

Instrument 12V peak to peak

GAIN Mic 57dB High Z, 72dB Low Z

Instrument 44dB w/Gain switch out, Ch2

85dB w/Gain switch in, Ch1

SENSITIVITY Mic 3.5mV RMS High Z, 20mV RMS Low Z

Instrument 80mV RMS w/Gain switch out, Ch2

.8mV RMS w/Gain switch in, Ch1

Line In Insert 400mV RMS

EQS, MIC Low ±15dB @ 60Hz

Mid ±15dB @ 600Hz

High ±15dB @ 10kHz

EQS, INSTRUMENT Low 12.5dB range @ 80Hz

Mid 18dB range @ 800Hz

High 18dB range @ 10kHz

Shape Crate proprietary circuit

INSERT JACK Tip Line In

Ring Line Out

Sleeve Ground

SPEAKERS Woofer Crate Custom Design 10”, 4 ohm, 100 watt

1.5” voice coil, 16 oz magnet

Tweeter 2” Piezo , 4 ohm, 150 watt network

POWER REQUIREMENTS Internal 12 volt DC power supply

DC adapter for use with 120VAC

Optional 12V vehicle lighter adapter

SIZE AND WEIGHT 18-1/2”W x 13-1/2”H x 12-1/2”D; 22 lbs.

The TX50DE is enclosed in a rugged, molded high tech polymer cabinet. Wipe

the enclosure with a damp, lint-free cloth to remove dirt and road film. Never

spray cleaning agents directly onto the enclosure, and stay away from abra-

sive cleansers which could damage the finish.

Crate continually develops new products, as well as improves existing ones. For this reason,

the specifications and information in this manual are subject to change without notice.