Instructions / Assembly

SAVE THESE INSTRUCTIONS

CLAREMONT GLIDER WITH CUSHION

ASSEMBLE ON A FLAT, PROTECTED SURFACE.

PART LIST FIGURE QUANTITY DESCRIPTION

A 1 PC RIGHT ARM

B 1 PC LEFT ARM

C 1 PC BACK

D 1 PC SEAT

E 1 PC BASE

F 2 PCS GLIDER

G 6 + 1 PCS SHORT BOLT (M6*18)

H 2 + 1 PCS MEDIUM BOLT (M6*40)

I 8 + 1 PCS LONG BOLT (M6*30)

J 8 + 1 PCS FLAT WASHER

K 16 + 1 PCS FLAT WASHER

L 1 PC ALLEN WRENCH

M 1 PC SEAT CUSHION

N 2 PCS BACK CUSHION

Page 1/3

PAGE 1
SAVE THESE INSTRUCTIONS CLAREMONT GLIDER WITH CUSHION ASSEMBLE ON A FLAT, PROTECTED SURFACE.
PAGE 2
CLAREMONT GLIDER WITH CUSHION ASSEMBLY INSTRUCTIONS(CONTINUED) STEP 1 A. PLACE RIGHT ARM (A) UPSIDE DOWN ON A FLAT, PROTECTED SURFACE. B. ATTACH SEAT (D) TO RIGHT ARM (A) WITH FLAT WASHER (K) AND SHORT BOLT (G) USING ALLEN WRENCH (L). DO NOT TIGHTEN COMPLETELY. C. ATTACH LEFT ARM (B) TO SEAT (D) WITH FLAT WASHER (K) AND SHORT BOLT (G) USING ALLEN WRENCH (L). DO NOT TIGHTEN COMPLETELY. STEP 2 A. TURN SEAT ASSEMBLY TO UPRIGHT POSITION. B.
PAGE 3
CLAREMONT GLIDER WITH CUSHION ASSEMBLY INSTRUCTIONS (CONTINUED) STEP 4 A. ATTACH BASE (E) TO SHORT ARM OF GLIDER SUPPORT ON GLIDER (F) WITH FLAT WASHER (K), FLAT WASHER (J) AND LONG BOLT (I) USING ALLEN WRENCH (L). STEP 5 A. TURN GLIDER TO UPRIGHT POSITION SO THAT IT STANDS SQUARELY ON THE FLOOR. B. TIGHTEN ALL BOLTS SECURELY USING ALLEN WRENCH (L). C. RETAIN ALLEN WRENCH (L) FOR USE TO TIGHTEN BOLTS PERIODICALLY OR AS NEEDED. STEP 6 A.