Cut Sheet

Knock’er Loose® Plus Penetrating Solvent
DISCLAIMER: This information is accurate to the best of CRC Industries’ knowledge or obtained from sources believed by CRC to be
accurate. Before using any product, read all warnings and directions on the label. All products should be tested for suitability on a particular
application prior to actual use. CRC Industries, Inc. makes no representations or warranties of any kind concerning this data.
CRC Industries, Inc. Industrial Products Division Warminster, PA 18974
Technical Service: [phone] Customer Service: [phone] CRC On-Line: [phone]
Literature Reorder #TDS293 CRC On-Line # 293 REV. 2/11
VII. Directions
 Apply liberal coating to corroded surfaces, saturating problem areas.
 Allow oil to seep between joints and surface area.
 Tap joint lightly to aid penetration.
 Proceed with disassembly.
 Repeat application for stubborn spots.
 Do not apply while equipment is energized.
VIII. Package Description
Part Number Container Size
03027 20 oz Aerosol
IX. Disposal
Disposal requirements vary by state and local jurisdiction. All used and unused product should be disposed of in
conformance with local, state and federal regulations.
X. Special Use Warnings
Product is flammable. Mixture will burn and should not be used near open flames or other ignition sources.
Aerosol Cans
Do not puncture, incinerate or store above 120F. Exposure to high temperatures may cause can to burst. Do not
place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live
electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to
observe this warning may result in serious injury from flash fire and/or electrical shock.
General
Use only in well ventilated area. Ventilation may be improved by opening a window or door or providing mechanical
assistance. Avoid continuous breathing of vapor and spray mist. Avoid contact with skin and eyes. If ventilation is
not adequate, respiratory protection should be worn. For more information regarding short term and long term
exposure, review this product’s Material Safety Data Sheet.
NSF Nonfood Compounds Registration Program
This CRC product is registered with the NSF for use in meat and poultry plants. NSF International, formerly the
National Sanitation Foundation, is known for the development of standards, product testing and certification services
in the areas of public health safety and protection of the environment. The NSF Nonfood Compounds Registration
Program replaces the program formerly administered by the United States Department of Agriculture (USDA) and
discontinued in February 1998. Products eligible for NSF registration include all compounds used in food handling,
processing and storage, such as disinfectants and lubricants. The NSF registration assures inspection officials and
end users that registered products are safe to use in food processing environments.