Cut Sheet

US. NIOSH: Pocket Guide to Chemical Hazards
ValueComponents Type
STEL 54000 mg/m3Carbon dioxide (CAS
124-38-9)
30000 ppm
TWA 9000 mg/m3
5000 ppm
STEL 450 mg/m3t-Butanol (CAS 75-65-0)
150 ppm
TWA 300 mg/m3
100 ppm
US. AIHA Workplace Environmental Exposure Level (WEEL) Guides
ValueComponents Type
TWA 4240 mg/m31,1,1,2-Tetrafluoroethane
(CAS 811-97-2)
1000 ppm
TWA 5.9 mg/m3Butylene oxide (CAS
106-88-7)
2 ppm
Biological limit values
No biological exposure limits noted for the ingredient(s).
Exposure guidelines
US - California OELs: Skin designation
n-Propyl bromide (CAS 106-94-5) Can be absorbed through the skin.
Appropriate engineering
controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Eye
wash facilities and emergency shower must be available when handling this product.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
Skin protection
Hand protection
Wear protective gloves such as: Viton®. Silver Shield®
Other
Wear appropriate chemical resistant clothing. Use of an impervious apron is recommended.
Respiratory protection
Use a NIOSH-approved cartridge respirator with an organic vapor cartridge unless exposure is
below the TLV. Air monitoring is required to determine actual employee exposure levels. Use a
self-contained breathing apparatus in confined spaces and for emergencies.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
When using, do not eat, drink or smoke. Always observe good personal hygiene measures, such
as washing after handling the material and before eating, drinking, and/or smoking. Routinely
wash work clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Liquid.
Form
Aerosol.
Color
Colorless.
Odor
Solvent.
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
-266.8 °F (-166 °C) estimated
Initial boiling point and boiling
range
158 °F (70 °C) estimated
Flash point
None (Tag Closed Cup)
Evaporation rate
Fast
Flammability (solid, gas)
Not available.
4 / 9
Material name: Super Degreaser™ Cleaner/Degreaser
03110 Version #: 01 Issue date: 11-10-2014
SDS US