Cut Sheet

ManualsBrandsCRC ManualsChemicals & Cleaning SuppliesNon-chlorinated, zero VOC formula for cleaning where chlorinated solvents are not acceptable. High flashpoint of 180°F. Effectively removes soils with no residue build-up. Use caution on plastics

CRC Industries, Inc.

885 Louis Drive • Warminster PA • 18974

Technical Data Sheet

Heavy Duty Degreaser II

I. Product Description

CRC Heavy Duty Degreaser II is a versatile, non-chlorinated, non-conductive, zero VOC and non-corrosive

degreaser that aggressively attacks industrial soils to help maximize operating performance. Heavy Duty Degreaser

II will remove heavy deposits of wax, dust, oil, tar, ink, carbon dust and grease from metal, most plastic and nylon

surfaces. Its controlled evaporation rate enhances the strong cleaning action. It provides an excellent alternative to

chlorinated solvents for cleaning applications where chlorinated solvents are not acceptable.

II. Applications

Recommended for use on mechanical equipment, motors, switch gears, transformers, and a wide variety of industrial

and electrical equipment. Great for use as a parts washer solvent.

III. Features & Benefits

• High Flash Point. Reduces potential for fire.

• Non-Chlorinated. Lowers personal risk.

• No Residue. Reduces need for additional cleaning steps.

• Low Odor and Zero VOC Formulation. Promotes a better work environment and user comfort.

• Contains No Class I or Class II ODCs. Complies with EPA ozone depleting regulations.

• M.S.D.[L.]



-Material Safety Data Label. Provides instant access to current safety information should an

accident or OSHA inspection occur. Helps comply with OSHA Hazard Communications Standard 29 CFR

1910.1200.

IV. Physical Properties without propellant

Flash Point

180ºF PMCC

Boiling Point

>350° F

Odor

Slight hydrocarbon

Solubility

Slight

Appearance

Clear liquid

Specific Gravity

0.839

Vapor Density

>4 (air=1)

Propellant

VOC Content (Fed)

Aerosol

0 g/L

Bulk

0 g/L

Vapor Pressure

<0.1 mmHg @68°F

Sara Title III, Sect. 313 Chemicals

Prop 65

V. Specifications and Approvals

• NSF K1 and K2 Registered for use in meat and poultry plants.

Summary of content (2 pages)

PAGE 1
CRC Industries, Inc. Technical Data Sheet 885 Louis Drive • Warminster PA • 18974 Heavy Duty Degreaser II I. Product Description CRC Heavy Duty Degreaser II is a versatile, non-chlorinated, non-conductive, zero VOC and non-corrosive degreaser that aggressively attacks industrial soils to help maximize operating performance. Heavy Duty Degreaser II will remove heavy deposits of wax, dust, oil, tar, ink, carbon dust and grease from metal, most plastic and nylon surfaces.
PAGE 2
Heavy Duty Degreaser II VI. Performance Characteristics 42,100 volts 180°F 75 ASTM D-877 (Dielectric Strength) ASTM D-56 (Flash Point) ASTM D-1130 (KB Value) VII. Directions • • • • • • May be harmful to some plastics. Test on small area before using. Do not use on sensitive electronic equipment such as tape decks, VCRs, computers, etc. Use one of CRC’s precision cleaner products. To remove grease, oil, hydraulic fluids and related contaminants, spray until clean.