Cut Sheet

CRC Industries, Inc.
885 Louis Drive  Warminster PA  18974
Technical Data Sheet
General Purpose Silicone
Mold Release
I. Product Description
CRC General Purpose Silicone Mold Release is suitable for most applications where post-mold painting is not
required. This product has a medium duty silicone content (3.5%) and is a rapid dry, anti-stick mold release agent
suitable for cold and hot molds. CRC General Purpose Silicone Mold Release prevents sticking, which increases
the life of dies and molds, improves product surface finishes and reduces production times.
II. Applications
Excellent for use in injection and compression molding of ABS, acetal, acrylic, epoxy resins, HDPE, Noryl
®
, nylon,
Polyproplyene, polysulfone, and wax. Also for use in blow molding, extruders, foundries and investment castings.
III. Features & Benefits
 Prevents Sticking to increase the life of dies and molds, improve product surface finishes and reduce
production times.
 Rapid Dry, anti-stick mold release agent suitable for cold and hot molds.
 Effective Temperature Range of 35ºF to 600ºF.
 3.5% Solids provide excellent general-purpose lubrication.
 Low Odor, non-staining and non-corrosive.
 Meets FDA Regulation 21 CFR 175.300 (release agent) and 21 CFR 178.3570 (lubricant, incidental food
contact).
 Meets 1998 USDA Guidelines for use in meat and poultry plants.
IV. Physical Properties
Flash Point
ND
Boiling Point
ND
Odor
Slight Solvent
Freezing Point
< -50F
Appearance
Clear, oily liquid
Solubility
Not Soluble
Vapor Density
ND
VOC %
97%
Vapor Pressure
ND
Specific Gravity
.78
VOC Content (Fed)
756.6 g/L
Propellant
DME
Sara Title III, Sect. 313 Chemicals
No
Prop 65
No
V. Specifications and Approvals
 Meets 1998 USDA Guidelines for use in meat and poultry plants.
 Meets FDA Regulation 21 CFR 175.300 (release agent) and 21 CFR 178.3570 (lubricant, incidental food
contact).