MSDS

ManualsBrandsCRC ManualsChemicals & Cleaning Supplies10 WT OZ BORON NITRIDE MOLD RELEASE MOLD RELEASE LUBRICANT

SAFETY DATA SHEET

1. Identification

Boron Nitride Mold ReleaseProduct identifier

Other means of identification

03310

Product code

Mold release

Recommended use

None known.

Recommended restrictions

Manufacturer/Importer/Supplier/Distributor information

Company name

CRC Industries, Inc.

Address

885 Louis Dr.

Warminster, PA 18974 US

Telephone

General Information

215-674-4300

Technical

Assistance

800-521-3168

Customer Service

800-272-4620

24-Hour Emergency

800-424-9300 (US)

(CHEMTREC)

703-527-3887 (International)

Website

www.crcindustries.com

2. Hazard(s) identification

Category 1Flammable aerosols

Physical hazards

Liquefied gasGases under pressure

Category 4Acute toxicity, oral

Health hazards

Category 2Skin corrosion/irritation

Category 2ASerious eye damage/eye irritation

Category 1Specific target organ toxicity, single exposure

Category 3 respiratory tract irritationSpecific target organ toxicity, single exposure

Category 3 narcotic effectsSpecific target organ toxicity, single exposure

Category 2Specific target organ toxicity, repeated

exposure

Category 1Aspiration hazard

Category 2Hazardous to the aquatic environment, acute

hazard

Environmental hazards

Category 2Hazardous to the aquatic environment,

long-term hazard

Not classified.

OSHA defined hazards

Label elements

Signal word

Danger

Hazard statement

Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Harmful if

swallowed. May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious

eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness. Causes

damage to organs (eyes) by ingestion. May cause damage to organs through prolonged or

repeated exposure. Toxic to aquatic life. Toxic to aquatic life with long lasting effects.

1 / 11

Material name: Boron Nitride Mold Release

03310 Version #: 03 Revision date: 12-16-2016 Issue date: 07-20-2015

SDS US

Summary of content (11 pages)

PAGE 1
SAFETY DATA SHEET 1. Identification Product identifier Boron Nitride Mold Release Other means of identification Product code 03310 Recommended use Mold release Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Company name Address Telephone General Information Technical Assistance Customer Service 24-Hour Emergency (CHEMTREC) Website CRC Industries, Inc. 885 Louis Dr.
PAGE 2
Precautionary statement Prevention Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Do not apply while equipment is energized. Extinguish all flames, pilot lights and heaters. Vapors will accumulate readily and may ignite. Use only with adequate ventilation; maintain ventilation during use and until all vapors are gone.
PAGE 3
General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. Show this safety data sheet to the doctor in attendance. 5. Fire-fighting measures Suitable extinguishing media Unsuitable extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. None known. Specific hazards arising from the chemical Contents under pressure.
PAGE 4
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) Components Type Value methanol (CAS 67-56-1) PEL methylcyclohexane (CAS 108-87-2) PEL 260 mg/m3 200 ppm 2000 mg/m3 naphtha (petroleum), hydrotreated light (CAS 64742-49-0) PEL 500 ppm 400 mg/m3 propane (CAS 74-98-6) PEL solvent naphtha (petroleum), light aliph. (CAS 64742-89-8) PEL 100 ppm 1800 mg/m3 1000 ppm 400 mg/m3 100 ppm US.
PAGE 5
US - Tennessee OELs: Skin designation methanol (CAS 67-56-1) Can be absorbed through the skin. US ACGIH Threshold Limit Values: Skin designation methanol (CAS 67-56-1) Can be absorbed through the skin. US NIOSH Pocket Guide to Chemical Hazards: Skin designation methanol (CAS 67-56-1) Can be absorbed through the skin. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates Appropriate engineering should be matched to conditions.
PAGE 6
10. Stability and reactivity Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport. Chemical stability Material is stable under normal conditions. Possibility of hazardous reactions No dangerous reaction known under conditions of normal use. Conditions to avoid Heat, flames and sparks. Contact with incompatible materials. Incompatible materials Strong oxidizing agents. Nitrates. Fluorine. Chlorine. Hazardous decomposition products Carbon oxides.
PAGE 7
Components Species Test Results Inhalation LC50 Rat 61 mg/l, 4 Hours Oral LD50 Rat > 5000 mg/kg Rabbit > 5000 mg/kg propane (CAS 74-98-6) Acute Dermal LD50 solvent naphtha (petroleum), light aliph. (CAS 64742-89-8) Acute Dermal LD50 Rabbit > 2000 mg/kg Inhalation LC50 Rat 3400 ppm, 4 hours Oral LD50 Rat > 5000 mg/kg * Estimates for product may be based on additional component data not shown. Causes skin irritation.
PAGE 8
Components Fish Species Test Results LC50 Fathead minnow (Pimephales promelas) > 100 mg/l, 96 hours Aquatic Crustacea EC50 Water flea (Daphnia magna) Fish LC50 Fathead minnow (Pimephales promelas) > 100 mg/l, 96 hours methanol (CAS 67-56-1) > 10000 mg/l, 48 hours methylcyclohexane (CAS 108-87-2) Aquatic Fish LC50 Striped bass (Morone saxatilis) 5.
PAGE 9
Special precautions for user Special provisions Packaging exceptions Packaging non bulk Packaging bulk IATA UN number UN proper shipping name Transport hazard class(es) Class Subsidiary risk Packing group ERG Code Special precautions for user Other information Passenger and cargo aircraft Cargo aircraft only IMDG UN number UN proper shipping name Transport hazard class(es) Class Subsidiary risk Packing group Environmental hazards Marine pollutant EmS Special precautions for user Read safety instructions, S
PAGE 10
Food and Drug Administration (FDA) Not regulated. Superfund Amendments and Reauthorization Act of 1986 (SARA) Immediate Hazard - Yes Section 311/312 Delayed Hazard - Yes Hazard categories Fire Hazard - Yes Pressure Hazard - Yes Reactivity Hazard - No No SARA 302 Extremely hazardous substance US state regulations US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3, subd.
PAGE 11
1.