MSDS

Precautionary statement
Prevention
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open
flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Do
not apply while equipment is energized. Extinguish all flames, pilot lights and heaters. Vapors will
accumulate readily and may ignite. Use only with adequate ventilation; maintain ventilation during
use and until all vapors are gone. Open doors and windows or use other means to ensure a fresh
air supply during use and while product is drying. If you experience any symptoms listed on this
label, increase ventilation or leave the area. Do not breathe mist or vapor. Do not eat, drink or
smoke when using this product. Wear protective gloves and eye/face protection. Wash thoroughly
after handling. Avoid release to the environment.
Response
If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting. Rinse mouth. If
on skin: Wash with plenty of water. If skin irritation occurs: Get medical attention. Take off
contaminated clothing and wash before reuse. If inhaled: Remove person to fresh air and keep
comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. If in
eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing. If eye irritation persists: Get medical attention. If exposed: Call a poison
center/doctor. Collect spillage.
Storage
Store in a well-ventilated place. Store locked up. Protect from sunlight. Do not expose to
temperatures exceeding 50°C/122°F. Exposure to high temperature may cause can to burst.
Disposal
Dispose of contents/container in accordance with local/regional/national regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
60.7% of the mixture consists of component(s) of unknown acute toxicity.
3. Composition/information on ingredients
Mixtures
CAS numberCommon name and synonymsChemical name %
64742-49-0naphtha (petroleum), hydrotreated
light
40 - 50
106-97-8n-butane
20 - 30
74-98-6propane
10 - 20
64-17-5ethanol
5 - 10
67-56-1methanol
2 - 4
1302-78-9bentonite
1 - 3
108-87-2methylcyclohexane
1 - 3
64742-89-8solvent naphtha (petroleum), light
aliph.
1 - 3
Specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON
CENTER or doctor/physician if you feel unwell.
Inhalation
Remove contaminated clothing. Wash with plenty of soap and water. If skin irritation occurs: Get
medical advice/attention. Wash contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Eye contact
Call a physician or poison control center immediately. Rinse mouth. If material has been
swallowed and the exposed person is conscious, give small quantities of water to drink. Do not
induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the
lungs. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Ingestion
May cause drowsiness and dizziness. Headache. Nausea, vomiting. Severe eye irritation.
Symptoms may include stinging, tearing, redness, swelling, and blurred vision. May cause
respiratory irritation. Skin irritation. May cause redness and pain. Prolonged exposure may cause
chronic effects.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victim
under observation. Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
2 / 11
Material name: Boron Nitride Mold Release
03310 Version #: 03 Revision date: 12-16-2016 Issue date: 07-20-2015
SDS US