SDS

Precautionary statement
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read
and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not
spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn,
even after use. Do not apply while equipment is energized. Extinguish all flames, pilot lights and
heaters. Vapors will accumulate readily and may ignite. Use only with adequate ventilation;
maintain ventilation during use and until all vapors are gone. Open doors and windows or use
other means to ensure a fresh air supply during use and while product is drying. If you experience
any symptoms listed on this label, increase ventilation or leave the area. Do not breathe mist or
vapor. Do not eat, drink or smoke when using this product. Wear protective gloves/protective
clothing/eye protection/face protection. Wash thoroughly after handling. Avoid release to the
environment.
Response
If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting. Rinse mouth. If
on skin: Wash with plenty of water. If skin irritation occurs: Get medical attention. Take off
contaminated clothing and wash before reuse. If inhaled: Remove person to fresh air and keep
comfortable for breathing. Call a poison center/doctor if you feel unwell. If in eyes: Rinse
cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing. If eye irritation persists: Get medical attention. If exposed or concerned: Get
medical attention. Collect spillage.
Storage
Store in a well-ventilated place. Store locked up. Protect from sunlight. Do not expose to
temperatures exceeding 50°C/122°F. Exposure to high temperature may cause can to burst.
Disposal
Dispose of contents/container in accordance with local/regional/national regulations.
Hazard(s) not otherwise
classified (HNOC)
Static accumulating flammable liquid can become electrostatically charged even in bonded and
grounded equipment. Sparks may ignite liquid and vapor. May cause flash fire or explosion.
3. Composition/information on ingredients
Mixtures
CAS numberCommon name and synonymsChemical name %
67-64-1acetone
40 - 50
67-56-1methanol
10 - 20
124-38-9carbon dioxide
5 - 10
142-82-5n-heptane
5 - 10
108-88-3toluene
5 - 10
591-76-42-methylhexane
1 - 3
589-34-43-methylhexane
1 - 3
426260-76-6heptane, branched, cyclic and
linear
1 - 3
108-87-2methylcyclohexane
1 - 3
64742-49-0naphtha (petroleum), hydrotreated
light
1 - 3
64742-89-8solvent naphtha (petroleum), light
aliph.
1 - 3
617-78-73-ethylpentane
< 1
562-49-23,3-dimethylpentane
< 0.3
Specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen or
artificial respiration if needed. Call a POISON CENTER or doctor/physician if you feel unwell.
Inhalation
Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation
occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If
vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Do not use
mouth-to-mouth method if victim ingested the substance. Induce artificial respiration with the aid of
a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Ingestion
2 / 14
Material name: Brakleen® Brake Parts Cleaner - Non-Chlorinated
05084 Version #: 04 Revision date: 12-29-2016 Issue date: 04-28-2015
SDS US