MSDS

Product Name: Di-Electric Grease Product Number (s): 05105, 75106
Page 2 of 7
Section 3: Composition/Information on Ingredients
COMPONENT
CAS NUMBER
% by Wt.
Silicone gel mixture
63148-62-9 /
7631-86-9
> 95
Nitrogen
7727-37-9
< 5
Section 4: First Aid Measures
Eye Contact:
Immediately flush with plenty of water for 15 minutes. Call a physician if irritation persists.
Skin Contact:
Remove contaminated clothing and wash affected area with soap and water. Call a physician if
irritation persists. Wash contaminated clothing prior to re-use.
Inhalation:
Remove person to fresh air. Clear air passage if blocked. Keep person calm. If not breathing, give
artificial respiration. If breathing is difficult give oxygen. Call a physician.
Ingestion:
Wash out mouth immediately. Consult physician.
Note to Physicians:
Treat symptomatically.
Section 5: Fire-Fighting Measures
Flammable Properties:
This product is not flammable.
Flash Point:
> 500°F / 260°C (COC)
Upper Explosive Limit:
ND
Autoignition Temperature:
> 600°F / 316°C
Lower Explosive Limit:
ND
Fire and Explosion Data:
Suitable Extinguishing Media:
Foam, dry powder, carbon dioxide, sand, earth and water mist. Do not use water jet.
Products of Combustion:
Smoke, airborne soot, hydrocarbons and oxides of carbon and silicone
Explosion Hazards:
Aerosol containers, when exposed to heat from fire, may build pressure and explode.
Protection of Fire-Fighters:
Firefighters should wear self-contained, NIOSH-approved breathing apparatus for
protection against suffocation and possible toxic decomposition products. Proper eye and
skin protection should be provided. Use water spray to keep fire-exposed containers cool
and to knock down vapors which may result from product decomposition.
Section 6: Accidental Release Measures
Personal Precautions:
Use personal protection recommended in Section 8.
Environmental Precautions:
Take precautions to prevent contamination of ground and surface waters. Do not flush into
sewers or storm drains.
Methods for Containment & Clean-up:
Scrape up the bulk of the material and then wipe up the remainder with a cloth.
To prevent a slippery surface or walking hazard, pick up the remaining residue
with diatomaceous earth.