SDS

CAS number
%
Chemical name
Common name and synonyms
63148-62-9polydimethylsiloxane 80 - 90
112945-52-5amorphous fumed silica 5 - 10
7727-37-9nitrogen 1 - 3
9002-84-0polytetrafluoroethylene 1 - 3
Specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Move to fresh air. Call a physician if symptoms develop or persist.
Inhalation
Wash off with soap and water. Get medical attention if irritation develops and persists.
Skin contact
Rinse with water. Get medical attention if irritation develops and persists.
Eye contact
If swallowed, do NOT induce vomiting. Get medical attention if symptoms occur.
Ingestion
Direct contact with eyes may cause temporary irritation.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically.
Indication of immediate
medical attention and special
treatment needed
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
General information
5. Fire-fighting measures
Water spray. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
None known.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed. When exposed to extreme heat or hot
surfaces, vapors may decompose to harmful or fatal corrosive gases such as hydrogen fluoride.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Fire-fighting
equipment/instructions
In case of fire: Stop leak if safe to do so. Move containers from fire area if you can do so without
risk. Use water spray to cool unopened containers.
Contents under pressure. Pressurized container may rupture when exposed to heat or flame.
General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of
low areas. Many gases are heavier than air and will spread along ground and collect in low or
confined areas (sewers, basements, tanks). Wear appropriate protective equipment and clothing
during clean-up. Emergency personnel need self-contained breathing equipment. Do not touch
damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate
closed spaces before entering them. Local authorities should be advised if significant spillages
cannot be contained. For personal protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keep
combustibles (wood, paper, oil, etc.) away from spilled material. Wipe up with absorbent material
(e.g. cloth, fleece, vermiculite). Sweep up or vacuum up spillage and collect in suitable container
for disposal. The product is immiscible with water and will spread on the water surface. Stop the
flow of material, if this is without risk. For waste disposal, see section 13 of the SDS. Prevent entry
into waterways, sewer, basements or confined areas.
Methods and materials for
containment and cleaning up
Avoid discharge into drains, water courses or onto the ground. Use appropriate containment to
avoid environmental contamination.
Environmental precautions
7. Handling and storage
Pressurized container: Do not pierce or burn, even after use. Do not use if spray button is missing
or defective. Do not spray on a naked flame or any other incandescent material. Do not smoke
while using or until sprayed surface is thoroughly dry. Do not cut, weld, solder, drill, grind, or
expose containers to heat, flame, sparks, or other sources of ignition. Use caution around
energized equipment. The metal container will conduct electricity if it contacts a live source. This
may result in injury to the user from electrical shock and/or flash fire. Use only in well-ventilated
areas. Wear appropriate personal protective equipment. Observe good industrial hygiene
practices. For product usage instructions, see the product label.
Precautions for safe handling
2 / 8
Material name: Technician Grade Dielectric Grease
No. 05113 (Item# 1003734) Version #: 02 Revision date: 10-16-2017 Issue date: 06-25-2015
SDS US