SDS

Level 1 Aerosol.
Contents under pressure. Do not expose to heat or store at temperatures above 120°F/49°C as
can may burst. Do not puncture, incinerate or crush. Do not handle or store near an open flame,
heat or other sources of ignition. Store in tightly closed original container. Store in a well-ventilated
place. Store away from incompatible materials (see Section 10 of the SDS).
Conditions for safe storage,
including any incompatibilities
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-3 (29 CFR 1910.1000)
ValueComponents Type
TWA 0.8 mg/m3amorphous fumed silica
(CAS 112945-52-5)
20 mppcf
US. NIOSH: Pocket Guide to Chemical Hazards
ValueComponents Type
TWA 6 mg/m3amorphous fumed silica
(CAS 112945-52-5)
No biological exposure limits noted for the ingredient(s).
Biological limit values
Occupational Exposure Limits are not relevant to the current physical form of the product.
Exposure guidelines
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles).
Eye/face protection
Skin protection
Wear protective gloves such as: Nitrile.
Hand protection
Wear suitable protective clothing.
Other
If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a
NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained
breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to
determine actual employee exposure levels.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Solid.
Physical state
Aerosol. Paste.
Form
Off-white.
Color
Mild.
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
> 572 °F (> 300 °C)
Initial boiling point and boiling
range
> 392 °F (> 200 °C)
Flash point
> 572 °F (> 300 °C) Cleveland Open Cup
Evaporation rate
Not available.
Not available.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Not available.
3 / 8
Material name: Technician Grade Dielectric Grease
No. 05113 (Item# 1003734) Version #: 02 Revision date: 10-16-2017 Issue date: 06-25-2015
SDS US