MSDS

Precautionary statement
Prevention
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open
flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Do
not apply while equipment is energized. Extinguish all flames, pilot lights and heaters. Vapors will
accumulate readily and may ignite. Use only with adequate ventilation; maintain ventilation during
use and until all vapors are gone. Open doors and windows or use other means to ensure a fresh
air supply during use and while product is drying. If you experience any symptoms listed on this
label, increase ventilation or leave the area. Avoid breathing mist or vapor. Wash thoroughly after
handling. Wear eye protection/face protection. Wear protective gloves. Avoid release to the
environment.
Response
If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting. If on skin: Wash
with plenty of water. If skin irritation occurs: Get medical advice/attention. Take off contaminated
clothing and wash before reuse. If in eyes: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get
medical advice/attention. If inhaled: Remove person to fresh air and keep comfortable for
breathing. Call a poison center/doctor if you feel unwell. Collect spillage.
Storage
Store in a well-ventilated place. Store locked up. Protect from sunlight. Do not expose to
temperatures exceeding 50°C/122°F. Exposure to high temperature may cause can to burst.
Disposal
Dispose of contents/container in accordance with local/regional/national regulations.
Hazard(s) not otherwise
classified (HNOC)
Static accumulating flammable liquid can become electrostatically charged even in bonded and
grounded equipment. Sparks may ignite liquid and vapor. May cause flash fire or explosion.
3. Composition/information on ingredients
Mixtures
CAS number
%
Chemical name
Common name and synonyms
67-64-1acetone 30 - 40
68476-86-8liquefied petroleum gas 20 - 30
142-82-5n-heptane 10 - 20
589-34-43-methylhexane 3 - 5
108-87-2methylcyclohexane 3 - 5
63148-62-9polydimethylsiloxane 3 - 5
591-76-42-methylhexane 1 - 3
426260-76-6heptane, branched, cyclic and
linear
1 - 3
64742-49-0naphtha (petroleum), hydrotreated
light
1 - 3
64742-89-8solvent naphtha (petroleum), light
aliph.
1 - 3
562-49-23,3-dimethylpentane < 1
617-78-73-ethylpentane < 1
Specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON
CENTER or doctor/physician if you feel unwell.
Inhalation
Remove contaminated clothing. Rinse skin with water/shower. If skin irritation occurs: Get medical
advice/attention. Wash contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Not likely, due to the form of the product. Call a physician or poison control center immediately.
Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content
doesn't get into the lungs.
Ingestion
Aspiration may cause pulmonary edema and pneumonitis. May cause drowsiness and dizziness.
Headache. Nausea, vomiting. Severe eye irritation. Symptoms may include stinging, tearing,
redness, swelling, and blurred vision. Skin irritation. May cause redness and pain.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
2 / 12
Material name: Heavy Duty Silicone
No. 06077 (Item# 1003911) Version #: 01 Issue date: 08-17-2017
SDS US