MSDS

Biological limit values
ACGIH Biological Exposure Indices
ValueComponents Determinant Specimen Sampling Time
25 mg/l Acetone Urine
*
acetone (CAS 67-64-1)
* - For sampling details, please see the source document.
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Eye
wash facilities and emergency shower should be available when handling this product.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles).
Eye/face protection
Skin protection
Wear protective gloves such as: Nitrile. Polyvinyl alcohol (PVA). Viton/butyl.
Hand protection
Wear appropriate chemical resistant clothing.
Other
If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a
NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained
breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to
determine actual employee exposure levels.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Aerosol.
Form
Water-white.
Color
Solvent.
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
-195.9 °F (-126.6 °C) estimated
Initial boiling point and boiling
range
132.9 °F (56.1 °C) estimated
Flash point
< 0 °F (< -17.8 °C) Tag Closed Cup
Evaporation rate
Fast.
Not available.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
1.1 % estimated
Flammability limit - upper
(%)
12.8 % estimated
Vapor pressure
1518.9 hPa estimated
Vapor density
> 1 (air = 1)
Relative density
0.69 estimated
Solubility (water)
Slightly soluble.
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature
539.6 °F (282 °C) estimated
Decomposition temperature
Not available.
Viscosity (kinematic)
Not available.
Percent volatile
96.7 % estimated
5 / 12
Material name: Heavy Duty Silicone
No. 06077 (Item# 1003911) Version #: 01 Issue date: 08-17-2017
SDS US