Safety data sheet

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
MARKER PAINT
Creationdate :
18.05.15 Version : 1.0
Ref.Nr.:
BDS001592_3_20150518 (EN)
Replaces:
BDS001592_20140604
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
6 / 11
7.2. Conditions for safe storage, including any incompatibilities
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C.
Keep out of reach of children.
7.3. Specific end use(s)
Paints
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
Hazardous ingredient
CAS-nr.
method
EU established exposure limits:
2-methoxy-1-methylethyl acetate
108-65-6
TWA
50 ppm
STEL
100 ppm
National established exposure limits, United Kingdom
n-butyl acetate
123-86-4
TWA
150 ppm
STEL
200 ppm
ethyl acetate
141-78-6
TWA
200 ppm
STEL
400 ppm
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
Ensure adequate ventilation
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type A)
hands and skin :
Wear suitable protective gloves against chemicals
Recommended gloves:
Nitrile
eyes :
Wear safety goggles.
Environmental protection:
Avoid release to the environment.
Collect spillage.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
(for aerosols data for the product without propellant)
Apperance : physical state :
DME propelled liquid.