Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
CONTACT CLEANER
Creationdate :
29.06.17 Version : 3.1
Ref.Nr.:
BDS000082_3_20170629 (EN)
Replaces:
BDS000082_20160310
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 10
7.1. Precautions for safe handling
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Equipment should be earthed
Use explosion-proof electrical/ventilating/lighting/.../equipment.
Use only non-sparking tools.
Do not breathe aerosols or vapours.
Ensure adequate ventilation
Avoid contact with skin and eyes.
Wash thoroughly after use
Wear protective gloves/protective clothing/eye protection/face protection.
Eyewash bottles should be available
7.2. Conditions for safe storage, including any incompatibilities
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C.
Keep out of reach of children.
7.3. Specific end use(s)
Cleaners - Precision
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
Hazardous ingredient
CAS-nr.
method
EU established exposure limits:
carbon dioxide
124-38-9
TWA
9000 mg/m3
STEL
1800 mg/m3
propan-2-ol; isopropyl alcohol ;isopropanol
67-63-0
TWA
400 ppm
STEL
500 ppm
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
Ensure adequate ventilation
In all cases handle and use the product in accordance with good industrial
hygiene practices.
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type AX)
hands and skin :
When handling the product wear chemical-resistant gloves (standard EN 374).