MSDS

ManualsBrandsCRC ManualsChemicals & Cleaning SuppliesCutting Oil - 12oz Aerosol Spray Can



Page 1 of 7

Section 1: Product & Company Identification

Product Name:

Cutting Oil Thread Cutting Lubricant (aerosol)

Product Number (s):

14050, 75500

Product Use:

Cutting oil

Manufacturer / Supplier Contact Information:

In United States: In Canada: In Mexico:

CRC Industries, Inc. CRC Canada Co. CRC Industries Mexico

885 Louis Drive 2-1246 Lorimar Drive Av. Benito Juárez 4055 G

Warminster, PA 18974 Mississauga, Ontario L5S 1R2 Colonia Orquídea

www.crcindustries.com www.crc-canada.ca San Luís Potosí, SLP CP 78394

1-215-674-4300 (General) 1-905-670-2291 www.crc-mexico.com

(800) 521-3168 (Technical) 52-444-824-1666

(800) 272-4620 (Customer Service)

24-Hr Emergency – CHEMTREC: (800) 424-9300 or (703) 527-3887

Section 2: Hazards Identification

Emergency Overview

WARNING:

Flammable. Contents Under Pressure.

Appearance & Odor:

Brown viscous liquid, faint petroleum odor

Potential Health Effects:

ACUTE EFFECTS:

EYE:

Eye contact may result in slight irritation and redness.

SKIN:

Short term contact with skin is unlikely to cause any problems. Excessive or repeated contact and poor

hygiene conditions may result in dryness, dermatitis, erythema, oil acne, cracking and defatting of the

skin.

INHALATION:

Inhalation of vapors or mist may be irritating to the respiratory passages. Prolonged exposure may

result in dizziness and nausea.

INGESTION:

May result in nausea or stomach discomfort.

CHRONIC EFFECTS:

None known

TARGET ORGANS:

Lungs (oil mist)

Medical Conditions Aggravated by Exposure:

pre-existing skin disorders

See Section 11 for toxicology and carcinogenicity information on product ingredients.

Summary of content (7 pages)

PAGE 1
 Section 1: Product & Company Identification Product Name: Cutting Oil Thread Cutting Lubricant (aerosol) Product Number (s): 14050, 75500 Product Use: Cutting oil Manufacturer / Supplier Contact Information: In United States: CRC Industries, Inc. 885 Louis Drive Warminster, PA 18974 www.crcindustries.com 1-215-674-4300 (General) (800) 521-3168 (Technical) (800) 272-4620 (Customer Service) In Canada: CRC Canada Co. 2-1246 Lorimar Drive Mississauga, Ontario L5S 1R2 www.
PAGE 2
Product Name: Cutting Oil Thread Cutting Lubricant (aerosol) Product Number (s): 14050, 75500 Section 3: Composition/Information on Ingredients COMPONENT CAS NUMBER % by Wt. Hydrotreated naphthenic oil 64742-52-5 70 - 80 Additive blend proprietary 2-6 Liquefied petroleum gas 68476-86-8 15 - 25 Section 4: First Aid Measures Eye Contact: Immediately flush with plenty of water for 15 minutes. Call a physician if irritation persists.
PAGE 3
Product Name: Cutting Oil Thread Cutting Lubricant (aerosol) Product Number (s): 14050, 75500 with fresh air. If in confined space or limited air circulation area, clean-up workers should wear appropriate respiratory protection. Recover or absorb spilled material using an absorbent designed for chemical spills. Place used absorbents into proper waste containers. Section 7: Handling and Storage Handling Procedures: Keep away from flames, sparks or hot surfaces.
PAGE 4
Product Name: Cutting Oil Thread Cutting Lubricant (aerosol) Product Number (s): 14050, 75500 Specific Gravity: 0.924 Initial Boiling Point: > 500°F / 260°C Freezing Point: ND Vapor Pressure: ND Vapor Density: >5 (air = 1) Evaporation Rate: slow Solubility: negligible Coefficient of water/oil distribution: ND pH: NA Volatile Organic Compounds: wt %: 20.0 g/L: 184.8 lbs./gal: 1.
PAGE 5
Product Name: Cutting Oil Thread Cutting Lubricant (aerosol) Product Number (s): 14050, 75500 product. Ecotoxicity: hydrotreated naphthenic oil – 96 Hr LC50, Fathead minnow: >30,000 mg/L (static) Persistence / Degradability: This product is not readily biodegradable. Bioaccumulation / Accumulation: No information available Mobility in Environment: No information available Section 13: Disposal Considerations Waste Classification: The dispensed liquid product is not a RCRA hazardous waste.
PAGE 6
Product Name: Cutting Oil Thread Cutting Lubricant (aerosol) Product Number (s): 14050, 75500 Occupational Safety and Health Administration: This product is regulated by the Hazard Communications Standard. U.S.
PAGE 7
Product Name: Cutting Oil Thread Cutting Lubricant (aerosol) Product Number (s): 14050, 75500 The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. This information is accurate to the best of CRC Industries' knowledge or obtained from sources believed by CRC to be accurate. Before using any product, read all warnings and directions on the label.