Cut Sheet

ManualsBrandsCRC ManualsChemicals & Cleaning SuppliesRTV Silicone Adhesive, Red

CRC Industries, Inc.

885 Louis Drive  Warminster PA  18974

Technical Data Sheet

RTV Silicone Adhesive - Red

I. Product Description

CRC Red RTV (Room Temperature Vulcanizing) Silicone Adhesive is the simple way to seal, protect, bond,

insulate and waterproof. Superb for forming instant, custom-shaped gaskets, Red RTV Silicone adheres to most

materials used in the industrial, electrical, metalworking and construction industries. Red RTV Silicone is a high

temperature, high pressure, low odor, non-corrosive gasket sealant for use in a variety of applications that require no

sag or shrinkage at continuous temperatures ranging from -80ºF to 500ºF (600ºF intermittently).

II. Applications

Recommended and designed for a wide range of sealing, bonding, protection and water proofing in HVAC, electrical,

construction, metal working and many more applications. Use as a heavy duty industrial gasket adhesive for filling

gaps between mating parts, gear boxes, pumps, motors and for general gasket sealing.

III. Features & Benefits

 Seals, Bonds, Waterproofs and Protects.

 Cures at Room Temperature. No special curing methods required.

 Chemically Stable. Shows little change in physical properties after exposure to sunlight (UV rays), rain,

snow, ozone, temperature extremes and weathering.

 High Temperature Rating. Recommended for high temperature, high pressure applications.

 Non-Corrosive. Excellent for use on metal to metal contacts.

 Low Odor. Improves worker comfort.

IV. Physical Properties without propellant

Flash Point

Not Applicable

Boiling Point

Not Applicable

Odor

Slight

Solubility

None in water

Appearance

Red Paste

% Volatile

Not Determined

Vapor Density

>1 (air=1)

Specific Gravity

1.05

VOC Content (Fed)

<3%

Temperature range

-80F To 500F

Sara Title III, Sect. 313 Chemicals

600ºF intermittent

Prop 65

Propellant- 14059 only

Nitrogen

V. Specifications and Approvals

When fully cured and washed, CRC Red RTV Silicone Adhesive meets the following regulations:

 TT-S-001543A, Class B

 TT-S-0230C, Type 2, Class B

 ASTM C 920

VI. Performance Characteristics

Cure Time (Total)

24 hours

Elongation Rate

400%

Dielectric Strength

18 KV/mm

Tensile Strength

250 psi

Durometer Hardness (Shore A)

Summary of content (2 pages)

PAGE 1
CRC Industries, Inc. 885 Louis Drive  Warminster PA  18974 Technical Data Sheet RTV Silicone Adhesive - Red I. Product Description CRC Red RTV (Room Temperature Vulcanizing) Silicone Adhesive is the simple way to seal, protect, bond, insulate and waterproof. Superb for forming instant, custom-shaped gaskets, Red RTV Silicone adheres to most materials used in the industrial, electrical, metalworking and construction industries.
PAGE 2
RTV Silicone Adhesive - Red VII. Directions         Clean and dry all surfaces. Remove any oil and grease prior to application. Sealant adheres best to clean, unpainted surfaces. For a smooth seal, apply sealant at a 45º angle. Dispense RTV Silicone from the pressurized tube by pressing finger to nozzle to tilt sideways. RTV Silicone in the cartridge must be dispensed using a caulk gun. Cut tip of cartridge, screw-on applicator nozzle and cut nozzle to desired bead size.