Cut Sheet

Customer Care: 800-272-4620

Technical Information: 800-521-3168

www.crcindustries.com/ei

Your Best Solution

™

CRC Industries is a worldwide leader in the production of

specialty chemicals for maintenance and repair professionals

serving industrial, electrical, aviation, automotive and

marine markets.

CRC is ISO 9001:2008 certified and adheres

to the strictest guidelines for quality in all facets of research,

development and production.

CRC

, K&W

, Sta-Lube

, Marykate

and

products denoted with

and ™ are trademarks

of CRC Industries, Inc.

Made in USA

Food Zone Silicone Sealants

Directions

• Clean and dry all surfaces. Remove any oil and grease prior to application. Sealant adheres

best to clean, unpainted surfaces.

• For a smooth seal, apply sealant at a 45º angle. Food Zone Silicone Sealant in the cartridge

must be dispensed using a caulk gun (CRC part #14054). Cut tip of cartridge, screw-on

applicator nozzle and cut nozzle to desired bead size.

• If further tooling is required, complete within 5 minutes. Remove excess sealant immediately

with a dry paper towel.

• Normally sealant “skins” in 10 minutes, dries to the touch in one hour and fully cures and bonds

in 24 hours.

• If gasket is not used in assembly, apply sealant to surface of one part and allow skin to form

before assembling parts.

• After sealant is completely cured, excess material can be removed by trimming with a sharp

blade. Avoid undercutting the sealant.

• Not recommended for use involving continuous immersion in gasoline or head gasketing

operations.

Application

• Fully cured Food Zone Silicone Sealant has excellent adhesion to glass, metal, porcelain,

ceramic, wood, most plastics and many other non-porous substrates.

• Can be applied to surface temperatures from 0°F to 120°F and, after curing, withstands

constant operating temperatures from -70°F to 400°F.