Manualshelf

MSDS

ManualsBrandsCRC ManualsFire ProtectionFlame Resistant Sealant to fill, seal, bond, retrofit and insulate. Forms a permanent, waterproof, and airtight bond to most surfaces. UL classified as a flame resistant sealant. Meets key building code requirements as an approved fire block for service p
123456789
SAFETY DATA SHEET
1. Identification
Product identifier Fire Block Foam Sealant
Other means of identification
Product code
14084
Recommended use
Fire resistant sealant
Recommended restrictions
None known.
Manufacturer/Importer/Supplier/Distributor information
Manufactured or sold by:
Company name
CRC Industries, Inc.
Address
885 Louis Dr.
Warminster, PA 18974 US
Telephone
General Information
215-674-4300
Technical
Assistance
800-521-3168
Customer Service
800-272-4620
24-Hour Emergency
800-424-9300 (US)
(CHEMTREC)
703-527-3887 (International)
Website
www.crcindustries.com
2. Hazard(s) identification
Category 1Flammable aerosols
Physical hazards
Liquefied gasGases under pressure
Category 4Acute toxicity, inhalation
Health hazards
Category 2Skin corrosion/irritation
Category 2Serious eye damage/eye irritation
Category 1Sensitization, respiratory
Category 1Sensitization, skin
Category 3 respiratory tract irritationSpecific target organ toxicity, single exposure
Category 2Specific target organ toxicity, repeated
exposure
Not classified.
Environmental hazards
Not classified.
OSHA defined hazards
Label elements
Signal word
Danger
Hazard statement
Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes skin
irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled.
May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory
irritation. May cause damage to organs through prolonged or repeated exposure.
1 / 9
Material name: Fire Block Foam Sealant
2629 Version #: 01 Issue date: 08-01-2014
SDS US

Summary of content (9 pages)