MSDS

ManualsBrandsCRC ManualsChemicals & Cleaning SuppliesHydroForce Stainless Steel Cleaner - 18oz Aerosol Can, Limited Quantities Available

Material Safety Data Sheet

Material Safety Data SheetMaterial Safety Data Sheet

Material Safety Data Sheet

Page 1 of 7

Section 1: Product & Company Identification

Product Name: HydroForce® Stainless Steel Cleaner & Polish (aerosol)

Product Number (s): 14424, 74424

Product Use:

stainless steel cleaner

Manufacturer / Supplier Contact Information:

In United States: In Canada: In Mexico:

CRC Industries, Inc. CRC Canada Co. CRC Industries Mexico

885 Louis Drive 2-1246 Lorimar Drive Av. Benito Juárez 4055 G

Warminster, PA 18974 Mississauga, Ontario L5S 1R2 Colonia Orquídea

www.crcindustries.com www.crc-canada.ca San Luís Potosí, SLP CP 78394

1-215-674-4300 (General) 1-905-670-2291 www.crc-mexico.com

(800) 521-3168 (Technical) 52-444-824-1666

(800) 272-4620 (Customer Service)

24-Hr Emergency – CHEMTREC: (800) 424-9300 or (703) 527-3887

Section 2: Hazards Identification

Emergency Overview

DANGER:

Harmful or Fatal if Swallowed. Contents Under Pressure.

As defined by OSHA’s Hazard Communication Standard, this product is hazardous.

Appearance & Odor:

Milky white liquid, mild petroleum odor

Potential Health Effects:

ACUTE EFFECTS:

EYE:

Contact may cause mild irritation including stinging, redness and tearing.

SKIN:

Contact may cause mild irritation including redness and itching. Prolonged exposure can cause

drying or cracking of skin.

INHALATION:

Inhalation of small amounts of vapor is not expected to cause health effects. Prolonged or

concentrated exposure may lead to irritation of the nose and throat, as well as central nervous

system effects such as headaches and dizziness.

INGESTION:

Ingestion of small amounts is not expected to cause health effects. This product contains

petroleum distillates with can be an aspiration hazard. Ingestion of larger amounts can lead to

lung inflammation and damage if the petroleum distillates are aspirated into the lungs during

swallowing or vomiting.

CHRONIC EFFECTS: None known

TARGET ORGANS: None known

Medical Conditions Aggravated by Exposure: Pre-existing skin conditions or sensitivities

See Section 11 for toxicology and carcinogenicity information on product ingredients.

Summary of content (7 pages)

PAGE 1
Material Safety Data Sheet Section 1: Product & Company Identification Product Name: HydroForce® Stainless Steel Cleaner & Polish (aerosol) Product Number (s): 14424, 74424 Product Use: stainless steel cleaner Manufacturer / Supplier Contact Information: In United States: CRC Industries, Inc. 885 Louis Drive Warminster, PA 18974 www.crcindustries.com 1-215-674-4300 (General) (800) 521-3168 (Technical) (800) 272-4620 (Customer Service) In Canada: CRC Canada Co.
PAGE 2
Product Name: HydroForce® Stainless Steel Cleaner & Polish (aerosol) Product Number (s): 14424, 74424 Section 3: Composition/Information on Ingredients COMPONENT CAS NUMBER % by Wt. Water 7732-18-5 55 - 65 Hydrotreated light distillate 64742-47-8 15 – 25 White mineral oil 8042-47-5 5 - 10 Surfactant blend proprietary 5 - 10 Liquefied petroleum gas 68476-86-8 5 - 10 Section 4: First Aid Measures Eye Contact: Immediately flush with plenty of water for 15 minutes.
PAGE 3
Product Name: HydroForce® Stainless Steel Cleaner & Polish (aerosol) Product Number (s): 14424, 74424 or limited air circulation area, clean-up workers should wear appropriate respiratory protection. Recover or absorb spilled material using an absorbent designed for chemical spills. Place used absorbents into proper waste containers. Section 7: Handling and Storage Handling Procedures: Wash hands after using and before consuming food. Use caution around energized equipment.
PAGE 4
Product Name: HydroForce® Stainless Steel Cleaner & Polish (aerosol) Product Number (s): 14424, 74424 Color: milky white Odor: mild petroleum Odor Threshold: ND Specific Gravity: 0.9328 Initial Boiling Point: ND Freezing Point: ND Vapor Pressure: ND Vapor Density: ND (air = 1) Evaporation Rate: slow Solubility: soluble in water Coefficient of water/oil distribution: ND pH: 10.55 Volatile Organic Compounds: wt %: 26.25 g/L: 245 lbs./gal: 2.
PAGE 5
Product Name: HydroForce® Stainless Steel Cleaner & Polish (aerosol) Product Number (s): 14424, 74424 Section 12: Ecological Information Ecological studies have not been conducted for this product. The following information is available for components of this product.
PAGE 6
Product Name: HydroForce® Stainless Steel Cleaner & Polish (aerosol) Product Number (s): 14424, 74424 Section 313 Toxic Chemicals: This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372: None Clean Air Act: Section 112 Hazardous Air Pollutants (HAPs): None U.S.
PAGE 7
Product Name: HydroForce® Stainless Steel Cleaner & Polish (aerosol) Product Number (s): 14424, 74424 Revision Date: 08/20/2009 Changes since last revision: MSDS reformatted to meet the requirements of the Canadian Controlled Products Regulations. The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials.