MSDS

Product Name: Duster™ Moisture-Free Dust & Lint Remover
Product Number (s): 05185, 05185-6, 14507
Page 3 of 7
appropriate respiratory protection. If liquid is present, recover or absorb spilled
material using an absorbent designed for chemical spills. Place used
absorbents into proper waste containers.
Section 7: Handling and Storage
Handling Procedures: Vapors are heavier than air and may travel along the ground. Certain vapor
concentrations may be ignited by sources of ignition. Deliberately concentrating and inhaling
the vapors of this product may result in death. Use caution around energized equipment. The
metal container will conduct electricity if it contacts a live source. This may result in injury to the
user from electrical shock and/or flash fire. For product use instructions, please see the product
label.
Storage Procedures: Store in a cool dry area out of direct sunlight. Aerosol cans must be maintained below 120°F /
49°C to prevent cans from rupturing. Keep out of reach of children.
Aerosol Storage Level: I
Section 8: Exposure Controls/Personal Protection
Exposure Guidelines:
OSHA ACGIH
OTHER
COMPONENT TWA STEL TWA STEL TWA SOURCE UNIT
1,1-Difluoroethane (HFC-152a) NE NE NE NE 1000 AIHA ppm
N.E. – Not Established (c) – ceiling (s) – skin (v) – vacated
Controls and Protection:
Engineering Controls: Area should have ventilation to provide fresh air. Local exhaust ventilation is generally
preferred because it can control the emissions of the contaminant at the source, preventing
dispersion into the general work area. Use mechanical means if necessary to maintain vapor
levels below the exposure guidelines. If working in a confined space, follow applicable OSHA
regulations.
Respiratory Protection: None required for normal work where adequate ventilation is provided. If engineering controls
are not feasible or if exposure exceeds the applicable exposure limits, use a NIOSH-approved
cartridge respirator with organic vapor cartridge. Air monitoring is needed to determine actual
employee exposure levels. Use a self-contained breathing apparatus in confined spaces and
for emergencies.
Eye/face Protection: For normal conditions, wear safety glasses. Where there is reasonable probability of liquid
contact, wear splash-proof goggles.
Skin Protection: Use protective gloves such as insulated rubber. Also, use impervious clothing if there is
potential for contact of liquid with skin.
Section 9: Physical and Chemical Properties
Physical State: dispensed product is a gas; pressurized product is a liquefied gas
Color: colorless
Odor: ethereal
Odor Threshold: ND
Specific Gravity: 0.909