MSDS

ACGIH Biological Exposure Indices
ValueComponents Determinant Specimen Sampling Time
1.5 g/g Methylhippuric
acids
Creatinine in
urine
*
Xylene (CAS 1330-20-7)
* - For sampling details, please see the source document.
Exposure guidelines
US - California OELs: Skin designation
Toluene (CAS 108-88-3) Can be absorbed through the skin.
US - Minnesota Haz Subs: Skin designation applies
Toluene (CAS 108-88-3) Skin designation applies.
US ACGIH Threshold Limit Values: Skin designation
Stainless Steel Flake (CAS 65997-19-5) Can be absorbed through the skin.
Appropriate engineering
controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Eye
wash facilities and emergency shower must be available when handling this product.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
Skin protection
Hand protection
Wear protective gloves: Nitrile. Neoprene. Rubber.
Other
Wear appropriate chemical resistant clothing.
Respiratory protection
In case of insufficient ventilation, wear suitable respiratory equipment. Air monitoring is needed to
determine actual employee exposure levels.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
When using, do not eat, drink or smoke. Always observe good personal hygiene measures, such
as washing after handling the material and before eating, drinking, and/or smoking. Routinely
wash work clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Liquid.
Form
Aerosol.
Color
Silver.
Odor
Aromatic.
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
Not available.
Initial boiling point and boiling
range
-166 °F (-110 °C)
Flash point
-2.2 °F (-19 °C) Closed Cup
Evaporation rate
Not available.
Flammability (solid, gas)
Not available.
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
1.7 %
Flammability limit - upper
(%)
10.9 %
Vapor pressure
1386.3 hPa estimated
Vapor density
> 1 (air = 1)
Relative density
0.77 - 0.85
Solubility (water)
Not available.
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature
410 °F (210 °C) estimated
Decomposition temperature
Not available.
Viscosity (kinematic)
Not available.
5 / 11
Material name: Steel Re-Nu™
2408 Version #: 01 Issue date: 09-30-2013
SDS US