MSDS

ManualsBrandsCRC ManualsChemicals & Cleaning SuppliesZinc-It Galvanize Touch-Up Coating - 13oz Aerosol Can

Material Safety Data Sheet

Page 1 of 6

Section 1: Product & Company Identification

Product Name: Zinc-It® Instant Cold Galvanize

Product Number (s): 18412

Manufactured By:

CRC Industries, Inc. General Information (215) 674-4300

885 Louis Drive Technical Assistance (800) 521-3168

Warminster, PA 18974 Customer Service (800) 272-4620

www.crcindustries.com 24-Hr Emergency (CHEMTREC) (800) 424-9300

Section 2: Hazards Identification

Emergency Overview

Appearance & Odor: Gray viscous liquid, aromatic odor

DANGER

Extremely Flammable. Harmful or Fatal if Swallowed. Vapor Harmful.

Contents Under Pressure.

As defined by OSHA’s Hazard Communication Standard, this product is hazardous.

Potential Health Effects:

EYE:

Eye irritant. May cause irritation.

SKIN:

Skin irritant. May cause irritation. Frequent exposure to solvents may cause

defatting dermatitis.

INHALATION:

Inhalation of solvents may cause irritation, dizziness, and nausea. Propellant is a

simple asphyxiant.

INGESTION:

May cause headache, nausea, vomiting and weakness.

CHRONIC EFFECTS:

Defatting dermatitis to skin.

TARGET ORGANS:

Unknown

Medical Conditions Aggravated by Exposure:

Unknown

See Section 11 for toxicology and carcinogenicity information on product ingredients.

Summary of content (6 pages)

PAGE 1
Material Safety Data Sheet Section 1: Product & Company Identification Product Name: Zinc-It® Instant Cold Galvanize Product Number (s): 18412 Manufactured By: CRC Industries, Inc. 885 Louis Drive Warminster, PA 18974 www.crcindustries.
PAGE 2
Product Name: Zinc-It® Instant Cold Galvanize Product Number (s): 18412 Section 3: Composition/Information on Ingredients COMPONENT CAS NUMBER % by Wt. Zinc Elemental 7440-66-6 30 – 60 Toluene 108-88-3 10 – 30 Naphtha 8030-30-6 1-5 Isobutane 75-28-5 7 - 13 Propane 74-98-6 5 - 10 Section 4: First Aid Measures Eye Contact: Immediately flush with plenty of water for 15 minutes. Call a physician if irritation persists.
PAGE 3
Product Name: Zinc-It® Instant Cold Galvanize Methods for Containment & Clean-up: Product Number (s): 18412 Remove all sources of ignition. Dike area to contain spill. Ventilate the area with fresh air. If in confined space or limited air circulation area, clean-up workers should wear appropriate respiratory protection. Recover or absorb spilled material using an absorbent designed for chemical spills. Place used absorbents into proper waste containers.
PAGE 4
Product Name: Zinc-It® Instant Cold Galvanize Freezing Point: NE Vapor Pressure: 40 - 50 psig @ 68 F Vapor Density: > 1 (air = 1) (butyl acetate = 1) Evaporation Rate: > 1 negligible in water Solubility: NA pH: Volatile Organic Compounds: 38 wt %: Product Number (s): 18412 g/L: ~574 lbs./gal: ~4.8 Section 10: Stability and Reactivity Stability: Stable Conditions to Avoid: Sources of ignition. Temperature extremes.
PAGE 5
Product Name: Zinc-It® Instant Cold Galvanize Product Number (s): 18412 Section 13: Disposal Considerations Disposal: The dispensed liquid product is a RCRA hazardous waste for the characteristic of ignitability with the following potential waste codes: D001 (See 40 CFR Part 261.20 – 261.33) Aerosol containers should be fully emptied and depressurized before disposal. The empty container can be recycled. All disposal activities must comply with federal, state and local regulations.
PAGE 6
Product Name: Zinc-It® Instant Cold Galvanize Product Number (s): 18412 California to cause cancer, birth defects or other reproductive harm: Ethylbenzene, Toluene State Right to Know: New Jersey: Pennsylvania: Massachusetts: Rhode Island : 7440-66-6, 108-88-3, 8030-30-6 7440-66-6, 108-88-3, 8030-30-6 7440-66-6, 108-88-3, 8030-30-6 7440-66-6, 108-88-3, 8030-30-6 Additional Regulatory Information: This product complies with Aerosol Coating VOC regulations for Primers. (MIR = 1.