Datasheet

Technical data sheet
GALVACOLOR
Reference : 10678-10725
Manufactured by :
CRC Industries Europe bvba
Touwslagerstraat 1
9240 Zele Belgium
Tél.: (32)(0) 52/45.60.11 Fax : (32)(0) 52/45.00.34
www.crcind.com
1/2
1. General description
Zinc-phosphate protective coating.
Ideal for identification of utility
conduits. Primer and topcoat in one.
Short drying time. Official RAL
identification colors. Conform the
protect category C3(ISO 12944-2).
2. Features
No chlorinated solvents.
Totally free of lead and chromates.
Protects metals and alloys.
ISO 12944-2 protect category C3
3. Applications
Long term corrosion protection.
4. Directions
Shake until the agitator ball moves freely in the can.
Use only with adequate ventilation.
Remove most of the loose dirt with a wire brush.
Minimum application temperature = 10 °C
Apply to a clean, dry surface.
Spray from a distance of approximately 20 - 30 cm.
Apply a thin even film.
Best results are obtained with 2 lighter rather than 1 heavy coat. Additional coats can be applied after 15 - 20
minutes.
Clean the aerosol valve by turning the can upside down and spraying until only propellant escapes.
A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is
available for all CRC products.
5. Typical product data (without propellant)

Summary of content (2 pages)