Certifications 2

When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
Hygiene measures
Emissions from ventilation or work process equipment should be checked to ensure they comply
with the requirements of environmental protection legislation. Fume scrubbers, filters or
engineering modifications to the process equipment may be necessary to reduce emissions to
acceptable levels.
Environmental exposure
controls
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
Liquid.
Physical state
Aerosol
Form
Colorless.
Colour
Solvent.
Odour
Odour threshold
Not available.
pH
Not applicable.
Melting point/freezing point
-114.1 °C (-173.4 °F) estimated
Initial boiling point and boiling
range
Not available.
Flash point
12.0 °C (53.6 °F) Closed cup
Evaporation rate
Not available.
Not available.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
1.8 % estimated
Flammability limit - upper
(%)
12 % estimated
Vapour pressure
Not available.
Vapour density
Not available.
Relative density
0.94 g/cm3
Relative density temperature
20 °C (68 °F)
Solubility(ies)
Solubility (water)
Insoluble in water
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature
> 200 °C (> 392 °F)
Decomposition temperature
Not available.
Viscosity
Not available.
Not explosive.
Explosive properties
Not oxidising.
Oxidising properties
9.2. Other information
Aerosol spray enclosed space
Deflagration density
< 300 s/m³
Aerosol spray ignition
distance
< 15 cm
Chemical family
Cleaner
VOC
900 g/l
SECTION 10: Stability and reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
10.1. Reactivity
Material is stable under normal conditions.
10.2. Chemical stability
No dangerous reaction known under conditions of normal use.
10.3. Possibility of hazardous
reactions
Avoid high temperatures.
10.4. Conditions to avoid
Strong acids. Strong oxidising agents. Chlorine. Isocyanates.
10.5. Incompatible materials
Carbon oxides.
10.6. Hazardous
decomposition products
SDS UK
Material name: GRAFFITI REMOVER AE - Manufacturers
BDS000443AE Version #: 01 Issue date: 08-October-2020
6 / 10