Certifications 2

White mineral oil (CAS 8042-47-5)
Long-term, Systemic, Dermal 93 mg/kg bw/day
Long-term, Systemic, Inhalation 35 mg/m3
Workers
NotesAssessment factorValueComponents
1,2-BENZISOTHIAZOL-3(2H)-ONE;1,2-BENZISOTHIAZOLIN-3-ONE (CAS 2634-33-5)
Long-term, Systemic, Dermal 100 Repeated dose toxicity0.966 mg/kg bw/day
Long-term, Systemic, Inhalation 25 Repeated dose toxicity6.81 mg/m3
White mineral oil (CAS 8042-47-5)
Long-term, Systemic, Dermal 220 mg/kg bw/day
Long-term, Systemic, Inhalation 160 mg/m3
Predicted no effect concentrations (PNECs)
Components
White mineral oil (CAS 8042-47-5)
Secondary poisoning
Value
17 g/kg
Assessment factor
300 Oral
Notes
8.2. Exposure controls
Good general ventilation should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Provide eyewash station.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Use personal protective equipment as required. Personal protection equipment should be chosen
according to the CEN standards and in discussion with the supplier of the personal protective
equipment.
General information
Wear safety glasses with side shields (or goggles). Use eye protection conforming to EN 166.
Eye/face protection
Skin protection
When handling the product wear chemical-resistant gloves (standard EN 374). The breakthrough
time of the glove should be longer than the total duration of product use. If work lasts longer than
the breakthrough time, gloves should be changed part-way through. Neoprene gloves are
recommended. Suitable gloves can be recommended by the glove supplier.
- Hand protection
Not available.
- Other
In case of insufficient ventilation, wear suitable respiratory equipment. Chemical respirator with
organic vapour cartridge. (Filter type ABEK)
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
Hygiene measures
Emissions from ventilation or work process equipment should be checked to ensure they comply
with the requirements of environmental protection legislation. Fume scrubbers, filters or
engineering modifications to the process equipment may be necessary to reduce emissions to
acceptable levels.
Environmental exposure
controls
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Liquid.
Physical state
Aerosol
Form
White.
Colour
Characteristic odor.
Odour
Melting point/freezing point
-182 °C (-295.6 °F) estimated
Boiling point or initial boiling
point and boiling range
Not available.
Not available.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Not available.
Flammability limit - upper
(%)
Not available.
Flash point
> 100.0 °C (> 212.0 °F)
Auto-ignition temperature
> 200 °C (> 392 °F)
Decomposition temperature
Not available.
SDS UK
Material name: Inox Kleen - Manufacturers
BDS002536AE Version #: 01 Issue date: 27-May-2021
4 / 10