Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
Inox Kleen
Creationdate :
01.11.18 Version : 1.1
Ref.Nr.:
BDS002385_3_20181101 (EN)
Replaces:
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 10
Avoid contact with skin and eyes.
Wash thoroughly after use
Wear protective gloves/protective clothing/eye protection/face protection.
Eyewash bottles should be available
7.2. Conditions for safe storage, including any incompatibilities
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C.
Keep out of reach of children.
7.3. Specific end use(s)
Cleaners - Heavy duty
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
No information available
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
In all cases handle and use the product in accordance with good industrial
hygiene practices.
Ensure adequate ventilation
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with ABEK type cartridge
hands and skin :
For incidental contact with the product wear chemical-resistant gloves
(standard EN 374). The use of disposable gloves is acceptable provided that
they are changed immediately after a splash or spill.
Where intentional contact is expected reusable gloves with a breakthrough
time of minimum 10 minutes should be used. The breakthrough time of the
glove has to be adapted to the total duration of product use.
In all cases handle and use the product in accordance with good industrial
hygiene practices.
Recommended gloves:
(neoprene)
eyes :
Wear safety eyewear according to EN 166.
Environmental protection:
Avoid release to the environment.
Collect spillage.
SECTION 9: Physical and chemical properties