Datasheet

Manufactured by :
CRC Industries Europe BVBA
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA
1/2
CRC FAST STICK
Fast stick adhesive
Ref. : 10039
1. GENERAL DESCRIPTION
CRC Fast Stick is a fast tacking, nonchlorinated spray adhesive. This specialist formulation
will provide instant ‘grab’, which allows pressure to be exerted on the bond before full cure
strength is achieved.
2. FEATURES
• CRC Fast stick - provides instant grab
• Provides permanent bonds
• Free from chlorinated solvents
• Tack time approximately 30 seconds
• Economical in use - only a light film is required for instant grab
3. APPLICATIONS
• CRC Fast Stick has been formulated to satisfy the demands of the carpeting and
flooring trade. It is also suitable for bonding many different substrates, including:
Carpet
Underlay
Foam
Fabric
Cork
Upholstery
Paper
Cardboard
Wood
to a wide variety of different surfaces.
• Used for fixation and assembly of GRP (glasfiber reinforced polyester) parts, like
typically used in the windmill industry.
4. DIRECTIONS
• Apply an even coating from 25 – 30 cm distance:
o to both surfaces to be bonded for a permanent bond.
o to one surface for a re-positionable bond.
• Wait until the adhesive is tack-dry.
• Bond the surfaces together using firm pressure.
• To prevent blockages, invert the can after use and spray to clear the nozzle.
N.B. May affect certain plastics. Always test on a small, inconspicuous area before
general use.
• A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is
available for all CRC products.