Datasheet

Manufactured by :
CRC Industries Europe BVBA
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA
2/2
CRC FAST STICK
Fast stick adhesive
Ref. : 10039
5. TYPICAL PRODUCT DATA (without propellant)
Appearance : Clear, amber liquid
Odour : Characteristic Solvent
SG @ 25°C : 0.66
Polymer type : Styrene Butadiene Rubber
Tack time : Approximately 30 seconds
Bonding time : Maximum adhesion in 12/24 hours
Temperature range : Up to 50°C (dried film)
Solubility : Soluble in some solvents, insoluble in water
Recommended solvents : CRC Industrial Degreaser
6. PACKAGING
Aerosol 12 x 500 ml
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide
variety of equipment and conditions and the unpredictable human factors involved, we recommend that our
products be tested on-the-job prior to use. All information is given in good faith but without warranty neither
expressed nor implied.
This Technical Data Sheet may already have been revised at this moment for reason such as legislation,
availability of components and newly acquired experiences. The latest and only valid version of this Technical
Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com.
We recommend you to register on this website for this product so you will be able to receive any future updated
version automatically.
Version : 10039 03 1106 01
Date : 07 February 2013