Data Sheet

Technical data sheet
Lectra Clean II
Reference :
10107
Manufactured by :
CRC Industries Europe bvba
Touwslagerstraat 1
9240 Zele Belgium
Tél.: [phone] Fax : [phone]
www.crcind.com
2/3
• Wire ropes.
• Handling equipment.
4. Directions
• Spray liberally and allow to run off.
• Use extension tube for more precise application.
• When applied by dipping, agitation accelerates the action.
•
Slight heating (up to 40°C) enhances cleaning action in dipping baths. May also be applied by wiping with a clean
rag or by brushing. To clean equipment interior, covers, plates, etc. should be removed prior to product application.
• Do not use on energized equipment.
• Do not use on sensitive electronic equipment.
• Test before use on sensitive materials.
• Allow to dry completely before reactivation.
• Protect and re-lubricate if necessary.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.
5. Typical product data (without propellant)
Aerosol Bulk
Appearance Liquid. Liquid.
Color Colorless. Colorless.
Odor Solvent. Solvent.
Density 0.825 g/cm3 (@ 20°C). 0.825 (@ 20°C).
Distillation range 180-220 °C 180-220 °C
Flash Point 63 °C (Closed Cup) 63 °C (Closed Cup)
Auto Ignition temperature > 200 °C > 200 °C
Vapor density > 5 (@ 20°C). > 5 (@ 20°C).
Evaporation rate 150 (Ether=1) 150 (Ether=1)
Kauri Butanol value active product 84 84
Drying time active product 180 min 180 min
6. Packaging
Aerosol 12x200 ML
12x500 ML