Data Sheet

Technical data sheet

Dry Lube

Reference : 10255

Manufactured by :

CRC Industries Europe bvba

Touwslagerstraat 1

9240 Zele Belgium

Tél.: (32)(0) 52/45.60.11 Fax : (32)(0) 52/45.00.34

www.crcind.com

1/1

1. General description

Dry, non greasy surface lubrication.

2. Features

• Clean, dry and non-oily.

• Functional over a wide temperature range.

• Contains PTFE for extra lubricity.

• Produces a very low coefficient of friction.

• Most effective when low speeds and light loads are involved.

• High temperature resistance.

• Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.

3. Applications

• Coin mechanisms.

• Plastic drives and sliding mechanisms.

• Fine mechanics.

• Pneumatic tools.

• Precision instruments.

• Valves.

• Surface treatment.

PAGE 1
Technical data sheet Dry Lube Reference : 10255 1. General description Dry, non greasy surface lubrication. 2. Features • • • • • • • Clean, dry and non-oily. Functional over a wide temperature range. Contains PTFE for extra lubricity. Produces a very low coefficient of friction. Most effective when low speeds and light loads are involved. High temperature resistance. Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use. 3.
PAGE 2
Technical data sheet Dry Lube Reference : 10255 • Release agent for moulding plastic and rubber. • Transfer of CRC Dry Lube to moulded parts is negligible, minimizing interference with post finishing operations. 4. Directions • Shake well before use. • Shake until the agitator ball moves freely in the can. • To remove residues or excess product, use one of the CRC cleaners. • Spray from a distance of approximately 20 - 30 cm. • Allow to dry at room temperature. • Do not use on energized equipment.
PAGE 3
Technical data sheet Dry Lube Reference : 10255 Date Manufactured by : CRC Industries Europe bvba Touwslagerstraat 1 9240 Zele Belgium Tél.: (32)(0) 52/45.60.11 Fax : (32)(0) 52/45.00.34 www.crcind.