Datasheet

Manufactured by :
CRC Industries Europe BVBA
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA SHEET
1/2
CRC SUPER ADHESIVE GREASE
Ref. : 10416
1. GENERAL DESCRIPTION
Exceptional adhering EP-lithium grease.
CRC Super Adhesive Grease is a semi-synthetic high performance EP (extreme pressure)-
lithium soap-based grease for slow moving rolling-element and sliding-contact bearings. As a
result of its exceptional adhesive properties, this grease is normally used in environments
characterised by splash water, high humidity and dirt. The excellent long-term resistance
makes it suitable for use on difficult to reach lubrication points which are rarely lubricated.
2. FEATURES
• Extremely resistant to oxidation
• Extreme worked stability
• High pressure load
• Water resistant
• Good protection against corrosion
• High temperature stability
• Very good adhering properties
3. APPLICATIONS
• High loaded slow moving rolling-element bearings.
• High loaded slow moving sliding-contact bearings.
• Guides
• Bending and revolving joints
• Rim bearings in construction machines, milling units and presses.
4. DIRECTIONS
• Surfaces/equipment to be treated should be clean and dry. Use CRC Fast Dry Degreaser
for removing all dirt.
• When using CRC Super Adhesive Grease on new bearings, apply until fresh grease
appears.
• Roller bearings should normally only be half filled with grease. Follow bearing
manufacturer’s specifications.
• For best results, do not mix with other grease types.The mixing of different lithium-based
greases is not critical. Not compatible with sodium-based greases.
A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and
amendments is available for all CRC products.