Datasheet

Manufactured by :
CRC Industries Europe BVBA
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA
2/3
CRC EXTRA LOCK
(Permanent)
Ref. : 10767
The functional curing time is 1 to 3 hours and maximum resistance is obtained 24 hours later.
After the assembly, any possible excess adhesive can be removed with a dry cloth or tissue.
Clean cured product by tramping the part for 10 min. into CRC Super Gasket Remover. Flush
with water and remove remnants with a nylon brush.
5. TYPICAL PRODUCT DATA
• Properties of uncured material:
Viscosity (Brookfield RVT, 20 rpm, Sp.3) at 23 ºC : 500 mPa s
Specific weight : 1,1 g/ml
Recommended thread sizes : M5 till M16
Maximum screw diameter : M20
Flash point : > 100ºC
• Properties of the material when cured (24 hours, at 23ºC and 55% of RH)
Gap filling : 0,25 mm
Shear strength : 30 N/mm
2
Torque (ISO 10964)
break loose
: average 28 ± 2 Nm
prevailing : average 42 ± 3 Nm
Temperature range : -55 + 150 ºC
Open time : 2 - 5 minutes
Final resistance : 1-3 hours
Resistance : High
• Behaviour at elevated temperatures:
0
5
10
15
20
25
30
35
40
45
0 h 200 h 500 h 1000 h
Exposure time
Break loose torque (Nm)
23 °C 100 °C 150°C