Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
ECO BIO WELD
Creationdate :
02.06.20 Version : 6.0
Ref.Nr.:
BDS000323_3_20200602 (EN)
Replaces:
BDS000323_20200422
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 10
Welding Products
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
Hazardous ingredient
CAS-nr.
method
EU established exposure limits:
dimethyl ether
115-10-6
TWA
1000 ppm
National established exposure limits, United Kingdom
dimethyl ether
115-10-6
TWA
400 ppm
STEL
500 ppm
National established exposure limits, Ireland
triethanolamine
102-71-6
TWA
5 mg/m3
STEL
-
dimethyl ether
115-10-6
TWA
1000 ppm
STEL
-
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
Ensure adequate ventilation
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type A)
hands and skin :
When handling the product wear chemical-resistant gloves (standard EN 374).
The breakthrough time of the glove should be longer than the total duration of
product use. If work lasts longer than the breakthrough time, gloves should be
changed part-way through.
Recommended gloves:
Nitrile
eyes :
Wear safety eyewear according to EN 166.
Environmental protection:
Avoid release to the environment.
Collect spillage.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
(for aerosols data for the product without propellant)
Appearance : physical state :
DME propelled liquid.
colour :
Milky.
odour :
Characteristic odor.