Data Sheet

Technical data sheet

Extreme Lube

Reference :

Manufactured by :

CRC Industries Europe bvba

Touwslagerstraat 1

9240 Zele Belgium

Tél.: (32)(0) 52/45.60.11 Fax : (32)(0) 52/45.00.34

www.crcind.com

1/1

1. General description

Synthetic NLGI 2 grease, highly charged

with extreme pressure additives. Highly

stable with long service life. Operating

temp.: -40°C to 180°C.

2. Features

• Excellent water resistance.

• Functional over a wide temperature range.

• Provides long lasting lubrication.

• Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.

• Contains corrosion inhibitor.

• Very good oxidation stability.

3. Applications

• Pneumatic tools.

• Handling equipment.

• Bearings.

• Valves.

PAGE 1
Technical data sheet Extreme Lube Reference : 1. General description Synthetic NLGI 2 grease, highly charged with extreme pressure additives. Highly stable with long service life. Operating temp.: -40°C to 180°C. 2. Features • • • • • • Excellent water resistance. Functional over a wide temperature range. Provides long lasting lubrication. Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use. Contains corrosion inhibitor. Very good oxidation stability. 3.
PAGE 2
Technical data sheet Extreme Lube Reference : 4. Directions • Shake until the agitator ball moves freely in the can. • Stir or mix bulk products well before use. • Do not use on energized equipment. • Apply to a clean, dry surface. • Do not mix with other products. • To remove residues or excess product, use one of the CRC cleaners. • A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available for all CRC products.
PAGE 3
Technical data sheet Extreme Lube Reference : conditions of use and the unpredictable human factors involved, we recommend that our products are tested on-the-job prior to use. All information is given in good faith but without warranty neither expressed nor implied. This Technical Data Sheet may already have been revised as a result of a change in legislation, availability of components or newly acquired experiences.