Datasheet

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
Graphite Assembly Paste
Creationdate :
29.06.17 Version : 3.0
Ref.Nr.:
BDS000077_3_20170629 (EN)
Replaces:
BDS000077_20140213
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 9
Keep out of reach of children.
7.3. Specific end use(s)
Lubricants
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
No information available
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
In all cases handle and use the product in accordance with good industrial
hygiene practices.
Ensure adequate ventilation
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type A or AX)
in combination with an oil proof solid and liquid particulate filter
hands and skin :
When handling the product wear chemical-resistant gloves (standard EN 374).
Use a reusable glove with a minimum breakthrough time of 30 minutes. The
breakthrough time of the glove should be longer than the total duration of
product use. If work lasts longer than the breakthrough time, gloves should be
changed part-way through.
Recommended gloves:
Nitrile
eyes :
Wear safety eyewear according to EN 166.
Environmental protection:
Avoid release to the environment.
Collect spillage.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
(for aerosols data for the product without propellant)
Apperance : physical state :
Propane/butane propelled liquid.
colour :
Black.
odour :
Characteristic odor.
pH :
Not applicable.
Boiling point/range :
Not available.
Flash point :
< 0 °C