Datasheet

Manufactured by :
CRC Industries Europe NV
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA SHEET
1/2
CRC MULTILUBE
Ref. : 10703
1. GENERAL DESCRIPTION
Water resistant, multipurpose lubricant.
A specially formulated blend of high quality mineral and synthetic oils, with anti-wear additives,
friction modifiers and tackiness agents. Multilube Transparent does not drip off, penetrates deeply
into vital hinges and bushing areas, and then sets to form a water resistant, long lasting lubricant
film. Designed even for highly loaded reciprocal moving parts, high power and shock load
conditions.
2. FEATURES
• Resists hot and cold water wash-off.
• Resists high temperature friction points.
• Reduces friction and wear.
• Reduces noise and vibration.
• Reduces the resistance when tightening screws and bolts (especially stainless steel).
• Extends chain life.
• Compatible with o-rings mounted in chains.
• Harmless to metals and most plastics and rubbers (test before using on plastic or rubber parts).
• Does not contain chlorinated solvents.
• Aerosol formula uses hydrocarbon propellant and is provided with a small-angle nozzle and an
extension tube for precise, controlled application and film thickness.
3. APPLICATIONS
• Hinges.
• Door stops on cars.
• Articulation points.
• Valve stems.
• Sliding rails for venting roofs, sliding doors, car & tuck seats.
• Hoists.
• Conveyors (also overhead conveyors).
• Coupling mechanisms.
• Forklifts.
• Overhead door drives.
• Tractors and farm equipment.
• Car wash equipment.
• Window mechanisms.
• Threaded connections (especially stainless steel).
• Friction bearings.
• Spindles (caravans & small trailers).