Datasheet

SILICONE

www.crcind.com

Technical

Data

Sheet

P a g e | 1

Technical Data Sheet

Product name: Silicone Creation date: 01 March 2016 Version: 1

Sales code: 31262 Replaces: 0

Section 1: General description

Synthetic lubricant and release agent. Intended for use in the food processing industry where incidental

food contact may occur.

A non-toxic silicone lubricant based on silicone oil from a high purity polymer. CRC Silicone is an

excellent electrical insulator and non-flammable low-friction coating.

Section 2: Features

 Equipped with the exclusive Perma Lock System

o Integrated short and long distance applicator.

o Secured spray straw can not get lost.

o The locked actuator can not detach or get lost.

o Green color actuator, indicating H1 Food Processing Safe.

 Registered NSF class H1.

 Wide operating temperature range

 Resists oxidation.

 Prevents corrosion.

 Electrically insulating.

 High level of active ingredients.

 Extended effective lifetime.

 Complies with BRC Global Standard (Issue 7) - 4.7.6.

Section 3: Applications

 Provides long life lubrication in the food processing area. Applicable where an incidental

contact with the food might occur.

 Provides long life lubrication to: links, pins, slides and chutes.

 CRC Silicone offers an extraordinary protection to metals against water.;

 The light lubricating film prevents deterioration of plastics and rubbers and prevents them from

sticking to metals in extreme climatic conditions. (DO NOT APPLY ON SILICONE RUBBERS)

TECHNICAL DATA SHEET

PAGE 1
SILICONE Technical Data Sheet Product name: Silicone Sales code: 31262 Creation date: 01 March 2016 Version: Replaces: 1 0 Section 1: General description Synthetic lubricant and release agent. Intended for use in the food processing industry where incidental food contact may occur. A non-toxic silicone lubricant based on silicone oil from a high purity polymer. CRC Silicone is an excellent electrical insulator and non-flammable low-friction coating.
PAGE 2
Section 4: Directions         Avoid mixing with other lubricants Do not use on energized equipment Clean the application area thorough and ensure the surface is dry. Apply to surface to be treated from a distance of 25cm. Allow to dry completely. If needed, apply additional layers. Allow complete drying before starting the movement. Remove over-spray with a suitable cleaner. On our web site, a safety data sheet (SDS) is available for all CRC products.
PAGE 3
SILICONE Technical Data Sheet Section 6: Packaging Aerosol : 12 x 500 ml All statements in this publication are based on service experience and/or laboratory testing. Because of the wide variety of equipment and conditions and the unpredictable human factors involved, we recommend that our products be tested on-the-job prior to use. All information is given in good faith but without warranty neither expressed nor implied.