MSDS

Product Name: Food Grade Anti-Seize and Lubricating Compound
Product Number (s): SL35905, SL35906
Page 2 of 7
Section 3: Composition/Information on Ingredients
COMPONENT
CAS NUMBER
% by Wt.
Non-hazardous blend
82980-54-9 / 8042-47-5 /
9003-29-6 / 9002-84-0 /
68037-01-4 / 471-34-1
85 - 95
Diphenylamine
122-39-4
< 0.1
Talc
14807-96-6
5 - 10
Zinc oxide
1314-13-2
1 - 2
Section 4: First Aid Measures
Eye Contact:
Immediately flush with plenty of water for 15 minutes. Call a physician if irritation persists.
Skin Contact:
Remove contaminated clothing and wash affected area with soap and water. Call a physician if
irritation persists. Wash contaminated clothing prior to re-use.
Inhalation:
Remove person to fresh air. Keep person calm. If not breathing, give artificial respiration. If
breathing is difficult give oxygen. Call a physician.
Ingestion:
Wash out mouth immediately. Contact a physician.
Note to Physicians:
Treat symptomatically.
Section 5: Fire-Fighting Measures
Flammable Properties:
As defined by OSHA, this product is nonflammable.
Flash Point:
> 400°F / 204°C
Upper Explosive Limit:
7.0
Autoignition Temperature:
> 500°F / 260°C
Lower Explosive Limit:
0.9
Fire and Explosion Data:
Suitable Extinguishing Media:
Foam, dry powder, Halon®, carbon dioxide, sand, earth & water mist. Do NOT use water
jet.
Products of Combustion:
Smoke, soot, hydrocarbons and oxides of carbon
Explosion Hazards:
Containers, when exposed to heat from fire, may build pressure and rupture.
Protection of Fire-Fighters:
Firefighters should wear self-contained, NIOSH-approved breathing apparatus for
protection against suffocation and possible toxic decomposition products. Proper eye and
skin protection should be provided. Use water spray to keep fire-exposed containers cool
and to knock down vapors which may result from product decomposition.
Section 6: Accidental Release Measures
Personal Precautions:
Use personal protection recommended in Section 8.
Environmental Precautions:
Take precautions to prevent contamination of ground and surface waters. Do not flush into
sewers or storm drains.
Methods for Containment & Clean-up:
Scrape up the bulk of the material. Wipe up the remainder with a cloth. Ventilate