Datasheet

ManualsBrandsCRC ManualsChemicalsCutting Oil Spray 400 ml

CRC INDUSTRIES EUROPE BVBA

Touwslagerstraat 1 - 9240 Zele - BELGIUM

Tel. +32 (0)52 45 60 11

Technical Data Sheet

Supercut

www.crcind.com

1/2

1. General description

Straight cutting oil for stand alone or limited series metal cutting operations.

2. Features

 Balanced lubrication and excellent cooling reduces friction and provides an increased tool life.

 Lowers operating temperatures and allows for higher operating speeds.

 Stable foam formulation.

 Safe on all metal surfaces, does not stain.

 Convenient 360° (including inverted position) spray valve for aerosols.

3. Applications

 Standard cuttting operations.

 Standard metals and alloys for machining.

4. Directions

 Shake well before use.

 Spray from a short distance.

 Repeat frequently during the application.

 To remove residues or excess product, use one of the CRC cleaners.

 A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is

available for all CRC products.



NOTE: The product can also be used to upgrade simple cutting oils (use 5% or more), but compatibility

and performance should be checked for each case.

5. Typical product data (without propellant)

Appearance

Foam.

Odor

Characteristic odor.

Density

0.879 g/cm3 (@ 20°C).

Viscosity

55.9 mPa.s (@ 20°C).

Kinematic viscosity

23.09 mPa.s (@ 40°C).

Flash point active product

>170 °C

Remarks

All statements in this publication are based on service experience and/or laboratory testing. Because

of the wide variety of equipment, conditions of use and the unpredictable human factors involved, we

recommend that our products are tested on-the-job prior to use. All information is given in good faith

but without warranty neither expressed nor implied. This Technical Data Sheet may already have been

Summary of content (2 pages)

PAGE 1
Technical Data Sheet Supercut 1. General description Straight cutting oil for stand alone or limited series metal cutting operations. 2. Features      Balanced lubrication and excellent cooling reduces friction and provides an increased tool life. Lowers operating temperatures and allows for higher operating speeds. Stable foam formulation. Safe on all metal surfaces, does not stain. Convenient 360° (including inverted position) spray valve for aerosols. 3.
PAGE 2
Technical Data Sheet Supercut revised as a result of a change in legislation, availability of components or newly acquired experiences. The latest and only valid version of this Technical Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com We recommend that you register on our website for this product, thus enabling you to automatically receive any future updates.