Datasheet

ManualsBrandsCRC ManualsChemicalsZinc Primer Spray 500 ml

Manufactured by :

CRC Industries Europe BVBA

Touwslagerstraat 1 – 9240 Zele – Belgium

Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34

www.crcind.com

TECHNICAL DATA

1/2

CRC ZINC PRIMER

Ref. : 10073

1. GENERAL DESCRIPTION

Multi-purpose zinc phosphate primer.

A zinc phosphate based, fast drying protective primer for metal surfaces. Formulated with

modified alkyd resins, zinc phosphate and other anti-corrosion pigments. Zinc Primer fights

rust and gives longer lasting interior and exterior corrosion resistance to topcoats.

2. FEATURES

• Ensures better topcoat adhesion and coverage.

• Retains topcoat colour brilliance.

• Grey colour is suitable even for light topcoat colours.

• Repaintable with all one-component paints, already after 1 hour.

• Slows down rust by inhibition and complex building.

• Saves pre-paint time by quickly filling hairline cracks and slight imperfections.

• Fast drying.

• Strong adhesion on degreased, bare metal surfaces. Surface preparation (e.g. by sanding,

scraping, …) may be needed for oxidised or galvanised surfaces.

• Totally lead and chromate free.

• No chlorinated and no aromatic solvents.

• Aerosols use dimethylether (DME) propellant for controlled application and film properties.

3. APPLICATIONS

• Car bodywork

• Farm machinery and equipment

• Boat fittings

• Steel building elements

• Metal windows

• Chassis and frames

• Seams

• Spot welds

4. DIRECTIONS

• Shake aerosol can very well for at least one minute after agitator ball is free. Stir or mix

bulk product well to obtain a homogeneous dispersion. Repeat frequently while using.

• Apply to a clean, degreased, dry surface for best results. Remove rust and scale with a

wire brush.

• Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat.

Topcoat is best applied after 12 to 48 h. A slight sanding is advised.

• When spraying is finished, clean aerosol valve by turning can upside down and press

button until only propellant escapes. If clogging occurs, remove button and clean orifice

with fine wire.

Summary of content (2 pages)

PAGE 1
TECHNICAL DATA 1/2 CRC ZINC PRIMER Ref. : 10073 1. GENERAL DESCRIPTION Multi-purpose zinc phosphate primer. A zinc phosphate based, fast drying protective primer for metal surfaces. Formulated with modified alkyd resins, zinc phosphate and other anti-corrosion pigments. Zinc Primer fights rust and gives longer lasting interior and exterior corrosion resistance to topcoats. 2. FEATURES • Ensures better topcoat adhesion and coverage. • Retains topcoat colour brilliance.
PAGE 2
TECHNICAL DATA 2/2 CRC ZINC PRIMER Ref. : 10073 • Do not use on energized equipment. Use in well ventilated area. • A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is available for all CRC products. 5.