Use and Care Manual

5
设备接线
Cable Connection
After the display is installed, please
connect the display cable.
显示屏安装完成后，请将显示屏线连接好。
Connect the Y-axis limit line.
连接Y轴限位线。
14
A
Caution
Do not connect or disconnect the cables
when the machine is powered on.
当机器通电时，请勿连接或断开连接线。
Insert the Teflon tube into the
pneumatic connector (also insert
the blue wire clamp)
将铁氟龙管插入气动接头（同时插入蓝
色线夹）
Connect the broken detection line
as shown in Figure A .
I
按图示A连
接断料检测线。
●Select the correct input voltage match
your local power.
(115/230V)
●Damage can occur if voltage is set
incorrectly.
●Connect the power cord to turn the power
switch on.
●选择正确的输入电压以匹配您的本地电源。
（115/230V）
●如果电压设置不正确，可能会造成损坏。
●连接电源线打开电源开关。
Power cord x 1
电源线
14
10