PRODYSSEY ASB Authentic Sound Box
Disclaimer Prodyssey ASB is manufactured by CreamWare Audio GmbH, Siegburg, Germany. (C) CreamWare 1999 - 2006 - all rights reserved. The following documentation, compiled by CreamWare Audio GmbH (henceforth called CreamWare), represents the current state of the described product. The documentation may be updated on a regular basis. Any changes which might ensue, including those necessitated by update specifications, are included in the latest version of this documentation.
Index Owner’s Manual Disclaimer Index Introduction 2 3 4 Getting started Making connections Power adaptor MIDI connection Audio connection Power switch USB connection and drivers Installation of Remote Software Presets 6 6 6 7 7 7 8 8 The Control Panel Portamento, Noise VCO 1 and VCO 2 Modulation LFO Sample/Hold Filter Envelopes Configuration Strip 9 9 11 12 13 14 17 19 Prodyssey Remote Software General information Panel layout Main page Add page Prefs page, Hardware info MIDI monitor MIDI keyboard Pr
Welcome Thank you for choosing the PRODYSSEY ASB. We are sure that you are going to have just as much fun with your new PRODYSSEY ASB as we had developing this unique and characteristic synthesizer. Please read this manual thoroughly in order to fully take advantage of the many features the PRODYSSEY ASB has to offer. Introduction The PRODYSSEY is a one-to-one reproduction of the ARP Odyssey synthesizer.
We relied on our tried and true Circuit Modeling process in order to preserve the original character of this instrument and to faithfully reproduce its wide range of sounds. This process delivers extremely faithful sound reproduction and aliasing-free algorithms. We were able to go beyond simply modeling certain aspects of this classic instrument; in fact, we fully emulated it. Even the knob settings and the behavior of the knobs themselves are identical to those of the original instrument.
Getting started Making Connections Connecting the power adaptor To connect your PRODYSSEY ASB to a mains supply, please use the power adaptor supplied with the unit. First connect the power adaptor to your PRODYSSEY ASB. Before plugging the adaptor's plug into a mains socket, make sure it is compatible with the mains voltage in your country. If you lose the power supply, a standard AC or DC 12V / 1.5A power adaptor can be used as a replacement. The PRODYSSEY ASB's power socket requires a hollow plug (5.
Audio Connections In order to hear the PRODYSSEY ASB, connect its stereo outputs to the left / right inputs of a mixer, a computer sound card or a HiFi system. You can also process external signals by plugging an audio sound source into your PRODYSSEY ASB's input.
You will then see the message 'Welcome to the Installation' - please continue by pressing 'Next'. On the following page you will find the license agreement. Please read it carefully and if you agree, select "I accept the license terms" - then continue by pressing the 'Next' button. You can now set the installation path within the 'Installation path' drop-down menu. If you don’t set a dedicated path here, the Remote Software will be installed to “C:\Programs\Creamware\Prodyssey ASB Remote”.
The Control Panel Portamento Portamento allows you to smoothly transition (glide) the pitch between consecutive notes. The fader determines the time interval between the notes. Setting it to Minimum deactivates portamento completely. You can toggle the portamento on/off with a footswitch. Noise Generator The noise generator allows you to select between White or Pink Noise. Voltage Controlled Oscillators (VCO1, VCO2) Oscillators 1&2 are identical except for a few minor differences.
Coarse Use this to set the oscillator frequency. The range can be adjusted over 6 octaves. Fine Use this knob to detune the oscillators with respect to one another. Detuning and then mixing two oscillators produces vibrations that result in a more lively sound. The range can be adjusted over approximately one octave. Octave Up/Down Unlike the original model, our remake is equipped with a switch that allows you to set each oscillators’ frequency in octave steps over a range of 3 octaves.
Pulse Width This is where you set the oscillator’s pulse width. To hear what your setting sounds like you need to turn on the pulse waveform in the audio mixer. The range extends from 50% to 5% of the pulse width. Pulse Width Modulation With this setting you can use modulation to change the pulse width. You can set either the sine wave LFO or the ADSR envelope as the modulation source. The knob determines the intensity of the modulation.
The only suitable Expression Pedal for your PRODYSSEY is the model "YamahaTM FC7" (or 100% compatible). Other models MUST NOT be connected as these may cause permanent damage to your PRODYSSEY! The PRODYSSEY ASB automatically recognizes a connected foot slider once the unit it switched on; however, it is activated only after it has been fully pressed and released. LFO The PRODYSSEY’s LFO features sine and square waveforms – you choose the wave form at the modulation destination.
Sample/Hold Sample/Hold transforms a continuous signal into a stepped signal by taking a sample from the sample/hold mixer’s signal at assignable intervals and memorizes (or “holds”) this value until the next sample is taken. This sampling can be triggered by the LFO or by pressing a key. Various combinations of assigned signals and set trigger modes can produce different types of effects.
Audio Mixer This is where the signals are mixed before they get sent to the filter. You can choose up to three of the six signals and adjust their volume levels. Possible signals are noise or ring modulation of OSC1&2, sawtooth or square of OSC1 and sawtooth or square of OSC2. Filter Section The filter section consists of a modulatable low-pass filter with resonance and is followed by a non-resonant, frequency-adjustable high-pass filter.
Voltage-Controlled Filter Adjustable parameters include the 24-db low-pass filter, “ARP” and “MOOG” modes, cutoff, and resonance. In addition, you can select three of six available modulation sources. VCF Frequency: The cutoff frequency of the low-pass filter is the frequency above which the spectrum is attenuated and overtones are de-emphasized. This is where you manually change the cutoff frequency.
The only suitable Expression Pedal for your PRODYSSEY is the model "YamahaTM FC7" (or 100% compatible). Other models MUST NOT be connected as these may cause permanent damage to your PRODYSSEY! The PRODYSSEY ASB automatically recognizes a connected foot slider once the unit it switched on; however, it is activated only after it has been fully pressed and released. With Key Follow selected, the cutoff frequency follows the played note according to the selected intensity.
Voltage Controlled Amplifier The envelope and the amplifier determine the sound’s volume curve. You can use the AR or the ADSR envelope to modulate the amplifier. You will also find the volume fader in this section of the synth. VCA Gain This is where you set the sound’s volume, which is independent of the envelope generated volume curve i.e. the PRODYSSEY ASB sounds the same even with no external keyboard, sequencer, etc. Envelope Generators Two envelopes are available for different modulation uses.
Release The fourth segment of the envelope. In the release phase the envelope falls back to zero. AR Velocity/ADSR Velocity This setting modulates all envelope levels in response to velocity. Depending on the selected modulation level the envelope levels can vary between minimum and maximum according to these settings. The velocity affects the assigned modulation.
Configuration Strip The lower 'configuration strip' section of the control panel contains various display features and controls to change system and effects settings and to manage presets. Match This display enables you to view the programmed value for every parameter of a currently active preset. When you turn a knob on the control panel, one of the seven yellow 'match' LED's will blink.
MIDI To change MIDI channel, press the 'channel' button and select the channel using the 'down/up' buttons or the data wheel. If a small vertical line appears in the display to the left of the channel number, it indicates that the instrument receives MIDI data on all channels simultaneously (this is called MIDI 'omni mode'). In omni mode, MIDI data is received on all sixteen channels, but transmitted only on the selected channel.
Having selected 'preset', you can press the 'user' button to switch between the factory and user banks. (Please note that this function will not work unless you press the 'preset' button first.) User (secondary function) The 'user' button has a secondary function which is activated by holding it down for one second. This sends current front panel settings to the PRODYSSEY's sound engine (and to the Remote Software) so you can hear them in action.
Effects programs: PARAMETER 1 PARAMETER 2 PARAMETER 3 Chorus Chorus Depth Chorus Rate Chorus Feedback Delay Time Delay Damping Delay Time Left Delay Time Right Delay BPM Delay BPM Delay Note Left Delay Note Right Chorus Delay Time Chorus Depth Delay Time Left Delay Time Right Chorus Delay BPM Delay BPM Delay Note Left Delay Note Right Parameters value range: C ontrol R ange C horus D epth C horus R ate C horus Feedback 0 - 10 0.01 Hz - 20 Hz -5 ... +5 D elay Time 0.
Prodyssey ASB Remote Software General To control your PRODYSSEY ASB with the Remote Software, you have to connect the PRODYSSEY ASB to a computer via USB or MIDI. Panel Layout The Remote Software has three pages for sound control: the 'Main' page duplicates the control panel of the PRODYSSEY ASB and contains all the parameters you already know from the hardware.
MAIN Page Operation in Detail Two features in the remote software function differently than those in the hardware panel: Global Octave There is an additional switch to the left and below the Noise key to set the footage. You can use this switch to change the footage for the entire instrument. AR/ADSR Velocity There is a single controller for both parameters on the hardware panel. With the remote software, you can individually control the degree to which the velocity affects each envelope’s intensity.
ADD Page Additional Features Bend Range This is where you set the maximum detuning via pitch bend in half tones. The value range covers 0 to 24 semitones. Modulation Intensity The maximum intensity of the engageable oscillation and filter modulations that can be set via the modulation wheel. BPM (MIDI Clock Setting) This is where you select your MIDI tempo settings. KEYBOARD NOTE Low Note On This enables the low-note priority, i.e., low tones have priority over high tones.
Retrig On This switches the envelopes’ trigger mode from Legato to Retrigger. When Retrigger is enabled the envelope is re-started anew each time legato notes are played. When Retrigger is disabled legato notes are slurred without re-starting the envelope. Single On This setting switches the instrument’s voices to one voice, regardless of how many voices are loaded. This results in correct playback of solo sounds with portamento.
EFFECTS (Chorus/Delay) The 'Add' page contains also controls for the chorus / flanger and stereo delay effects built into your PRODYSSEY ASB. Chorus / Flanger Flanger This switch toggles between the chorus and flanger effects. Rate Controls the speed of the chorus / flanger modulation. Depth Sets the intensity of the modulation. Phase Sets the phase of the modulation from 0 to 180 degrees. Feedback Controls the amount of feedback (regeneration).
BPM R Click here to set the right channel delay to a musical note length. Cross Controls the amount of left channel delay feedback signal sent to the right channel. Time (left / right) Adjusts the time of the delay from 1 to 1365 milliseconds (= 1.365 seconds). If 'BPM' is selected, you can enter the value as a note length. Feedback (left / right) Controls the amount of feedback applied to the delay effect. (This affects the number of repeats you will hear.
PREFS PAGE The 'Prefs' page is used to edit the PRODYSSEY ASB's system settings. MIDI In / Out Device (in / out) Use these windows to select the MIDI device (and port) you use for connecting the Prodyssey ASB's MIDI in and out to your computer. Channel (in / out) Set the PRODYSSEY ASB's MIDI in and out channels. Please make sure that you have set both MIDI in and MIDI out channels correctly.
Refresh Click on this button to update the displayed information for the unit, while reconnecting the software with the PRODYSSEY ASB again. Firmware Update This facility enables you to download software updates for your PRODYSSEY ASB's operating system when they become available. Activation Key Enter the activation key code of your PRODYSSEY ASB here. Firmware Source File Displays the name of the update file to be downloaded. Browse Click on the 'Browse...
MIDI MONITOR The 'MIDI monitor' button is on the lower panel of the Remote Software's display. Click on it to view a list of incoming and outgoing MIDI messages. Controls Clear Removes all entries from the MIDI monitor's display list.
MIDI KEYBOARD The Remote Software's built-in MIDI keyboard enables you to play the PRODYSSEY ASB without using an external keyboard or sequencer software - you can play the synthesizer with the computer mouse. Turn on the MIDI keyboard by clicking on its switch of the Remote Software's display. Channel Sets the MIDI keyboards's MIDI channel. Octave Sets the range of the MIDI keyboard in octave steps.
PRESET ADMINISTRATION The Remote Software always displays the currently active preset's name at the top right of its panel. Use the forward / back arrows to the left of the preset name to step through the presets. When it comes to more advanced preset management, the Remote Software's integrated preset administration section is an easy and convenient way of storing, exchanging and editing your presets.
Storing, deletion and changing of Presets To store a single preset in a bank, please create a new entry by selecting 'create preset' from the dropdown menu. The preset will be added to the bottom of the preset list with the name 'New Preset' - right click on the name to rename it. (You can also give it a number and rating, define its category and add a comment.) After creating a new entry, store the edited preset bank by clicking on 'save' or 'save as'.
Specifications Technology Physical Modelling, Virtual Circuit Modelling Number of Voices 12 Sampling Rate 44.1 kHz (internal oversampling) Resolution 32 bit (Audio) Analog Output 2 x 1/4 inch (6,3mm) unbalanced Analog Input 2 x 1/4 inch (6,3mm) unbalanced Control Inputs Pedal, Switch MIDI In, Out, Thru USB Full Speed USB rev 1.1 Power Supply AC or DC, 12V, 1.
Warranty Regulations The hardware described within this documentation and the warranty regulations are governed by and granted according to German Law. CreamWare Audio GmbH (“CreamWare”) warrants, that the described product has been free of failures within parts or components of the hardware and was found to be fully functional. Any single units has been checked by Quality Assurance Department several times and with various measures, before this product has been delivered to you.
Haftungsausschluss Prodyssey ASB ist ein Produkt der CreamWare Audio GmbH in Siegburg. (c) CreamWare 1998-2006 - alle Rechte vorbehalten. Die nachfolgende Dokumentation wurde erstellt von CreamWare Audio GmbH (CreamWare), und beschreibt den jeweils aktuellen Stand der Produktentwicklung. CreamWare behält sich sich vor, gegebenenfalls Änderungen an der Dokumentation vorzunehmen, sofern dies notwendig erscheint.
Inhaltsverzeichnis Benutzerhandbuch Haftungsausschluss Inhaltsverzeichnis Einleitung 38 39 40 Erste Schritte Anschluss des Netzteils MIDI Verbindung Audio Verbindung Netzschalter USB Verbindung und Treiberinstallation Installation der Remote-Software Presets 42 42 43 43 43 44 45 Die Bedienoberfläche Portamento, Noise VCO 1, VCO 2 Modulationen LFO Sample/Hold Filter Hüllkurven Der Configuration Strip 46 46 48 49 50 51 54 57 Remote-Software Allgemeines, Aufbau der Oberfläche Main Page Add Page Effekte P
Willkommen Vielen Dank, dass Sie sich für den PRODYSSEY ASB entschieden haben. Wir sind uns sicher, Sie werden mit Ihrem PRODYSSEY ASB genau so viel Spaß haben, wie auch wir an der Entwicklung dieses einzigartigen und charakterstarken Synthesizers. Bitte lesen Sie diese Bedienungsanleitung aufmerksam durch, um alle Funktionen des PRODYSSEY ASB kennen zu lernen und nutzen zu können. Einleitung Der Prodyssey ist die 1:1 Nachbildung des ARP Odyssey Synthesizers.
ohne wenn und aber, da er von kräftigen Bässen über schneidige Lead-Sounds bis hin zu beeindruckenden Effektklängen die komplette Soundpalette beherrscht. Mit dieser Klangvielfalt ist der Odyssey heute einer der gesuchtesten klassischen Synthesizer und hat somit nichts an Attraktivität von damals verloren. Um den Charakter dieses Instruments zu bewahren und seine Klangvielfalt komplett wiederzugeben, kommt auch hier Creamwares Circuit Modelling Verfahren zum Einsatz.
Erste Schritte Anschluss des Netzteils Um den Prodyssey mit Netzspannung zu versorgen, stecken Sie bitte das beiliegende Netzteil in die Steckdose. Verbinden Sie dann das Netzteil mit der Netzbuchse Ihres Gerätes. Bitte achten Sie vor dem ersten Gebrauch auf die Kompatibilität des Netzteils zu Ihrem Stromnetz. Bei Verlust des Netzteils kann ein Standard AC oder DC 12V Netzteil mit 1.5 A verwendet werden. Der Anschluss des Netzteils an den Prodyssey erfolgt über einen Hohlstecker (5.5mm x 2.
Den Ausgang des Prodyssey verbinden Sie bitte mit dem Eingang Ihres Sequencers/Keyboards. Soll das eingehene MIDI-Signal noch an ein anderes Gerät weitergeleitet werden, so verbinden Sie bitte auch MIDI Thru. Steht Ihnen kein MIDI-Port zur Verfügung, so können Sie alternativ auch den USB-Port Ihres Computers verwenden. Audio Verbindung Um das Audiosignal des Prodyssey abzuhören, verbinden Sie die Stereo Ausgänge mit den Audio-Eingängen Ihres Mischpultes, Computers oder Ihrer HiFi Anlage.
Installation der Remote-Software Um die Remote-Software zu installieren, legen Sie bitte die CD mit der Aufschrift PRODYSSEY ASB in das CD-Laufwerk Ihres Computers. Im Normalfall wird sich dabei der Installationsdialog von alleine öffnen. Sollten Sie jedoch die automatische Startfunktion Ihres CD-Laufwerks deaktiviert haben, so starten sie bitte die Anwendung "Setup.exe" manuell mittels Doppelklick von der CD.
Das Aufrufen der Presets Die Preset-Verwaltung am PRODYSSEY ASB erfolgt über die Sound-Sektion im Configuration-Strip. Es stehen 128 User- und 128 Factory-Presets zur Auswahl. Betätigen Sie den Taster PRESET, um das gewünschte Preset mit den DOWN/UP-Tastern oder dem Datenrad zu wählen. Ein Preset beinhaltet alle Einstellungen, die Parameter der„Add Page“ der Remote-Software und somit auch die Effekte.
Die Bedienoberfläche Portamento Durch Portamento werden aufeinanderfolgende Noten von einem Ton in den nächsten fließend überführt. Der Regler bestimmt die Zeit, mit der die Noten von einem Ton in den nächsten überführt werden. Steht der Regler auf Minimum, ist kein Portamento aktiv. Per Fußschalter bzw. Fußtaster lässt sich das Portamento aktivieren. Noise Hier können Sie zwischen White und Pink Noise wählen.
Coarse Stellen Sie hier die Frequenz des Oszillators ein, mit der er schwingt. Der Regelbereich ersteckt sich über 6 Oktaven. Fine Benutzen Sie diesen Regler, um die beiden Oszillatoren gegeneinander zu verstimmen. Werden zwei Oszillatoren gegeneinander verstimmt und gemischt, entstehen Schwebungen, der Klang wird somit lebendiger. Der Regelbereich erstreckt sich ungefähr über eine Oktave.
Pulse Width Stellen Sie hier die Pulsweite des Oszillators ein. Um das Ergebnis Ihrer Einstellung zu hören, muss im Audio-Mixer die Pulswellenform eingeschaltet sein. Der Regelbereich erstreckt sich von 50% bis 5% der Pulsweite. Pulse Width Modulation Hiermit können Sie die Pulsweite per Modulation ändern. Als Modulationsquelle steht wahlweise die Sinuswellenform des LFOs oder die ADSR-Hüllkurve zur Verfügung. Der Regler bestimmt die Intensität der Modulation.
Als Expression Pedal ist ausschließlich das Modell "YamahaTM FC7" (oder 100% Kompatible) geeignet. Andere Modelle dürfen nicht angeschlossen werden - sie können zur Beschädigung Ihres Prodyssey führen! Beim Einschalten des PRODYSSEY ASB wird ein angeschlossenes Pedal automatisch erkannt. Dieses ist jedoch erst aktiv, wenn der Pedalweg durchfahren wurde. LFO Der LFO des PRODYSSEY bietet die Wellenformen Sinus und Rechteck – die Wahl der Wellenform findet am Modulationsziel statt.
Sample/Hold Sample/Hold erzeugt aus einem kontinuierlichen ein gestuftes Signal, indem es in bestimmbaren Abständen dem Signal des Sample/ Hold-Mixers eine Probe (Sample) entnimmt und diesen Wert bis zur nächsten Probe speichert hält (Hold). Das Entnehmen der Probe kann vom LFO oder per Tastendruck ausgelöst werden. Je nach zugeführtem Signal und eingestelltem Triggermodus entstehen somit unterschiedliche Effekte.
Audio Mixer Hier werden die Signale gemischt, bevor sie in das Filter gelangen. Aus sechs Signalen können bis zu drei gewählt und in der Lautstärke abgestimmt werden. Mögliche Signale sind Noise oder Ringmodulation von OSC1&2, Sägezahn oder Rechteck von OSC1 und Sägezahn oder Rechteck von OSC2. Filter Sektion Die Filtersektion besteht aus einem modulierbarem Tiefpassfilter mit Resonanz und einem nachgeschaltetem Hochpassfilter mit einstellbarer Frequenz ohne Resonanz.
Voltage Controlled Filter 24 db-Tiefpassfilter, Charakteristik „ARP“ und „Moog“, Cutoff und Resonanz sind einstellbar. Weiterhin stehen drei Modulationen aus insgesamt sechs Modulationsquellen zur Verfügung. VCF Frequency: Die Cutoff Frequenz ist die Frequenz, oberhalb derer das Spektrum beschnitten wird, Obertöne werden abgesenkt. Hier verändern Sie manuell die Cutoff-Frequenz.
Als Expression Pedal ist ausschließlich das Modell "YamahaTM FC7" (oder 100% Kompatible) geeignet. Andere Modelle dürfen nicht angeschlossen werden - sie können zur Beschädigung Ihres Prodyssey führen! Beim Einschalten des PRODYSSEY ASB wird ein angeschlossenes Pedal automatisch erkannt. Dieses ist jedoch erst aktiv, wenn der Pedalweg durchfahren wurde. Bei Keyfollow folgt die Cutoff-Frequenz mit der eingestellten Intensität der gespielten Note.
Voltage Controlled Amplifier Zusammen mit der Hüllkurve bestimmt der Amplifier den Lautstärke-Verlauf des Klangs. Zur Modulation des Amplifiers steht die AR- oder die ADSR-Hüllkurve zur Verfügung. Der Volume-Regler befindet sich auch in dieser Sektion. VCA Gain Hier bestimmen Sie die Lautstärke des Klanges, der unabhängig von der dynamischen Lautstärkeformung durch die Hüllkurvengeneratoren zur Verfügung steht, d.h. der PRODYSSEY ASB klingt somit auch ohne Tastatur, Sequencer, etc.
Sustain Drittes Segment der Hüllkurve. Wert, auf dem die Hüllkurve nach Ablauf der Decay-Zeit bei gehaltener Taste verweilt. Die Wirkung von Sustain ist abhängig von der eingestellten Intensität an der Modulation. Release Viertes Segment der Hüllkurve. In der Release-Phase fällt die Hüllkurve zurück auf Null. AR Velocity/ADSR Velocity Modulation aller Level der Hüllkurve per Anschlagsstärke.
ADSR KEYB Gate/LFO Repeat Wählen Sie hier den Trigger-Modus für die ADSR-Hüllkurve. AR Kybd Gate/Lfo Repeat: Wählen Sie hier den Trigger-Modus für die AR-Hüllkurve. KEYB Repeat/Auto Repeat Keyboard Repeat wiederholt Hüllkurven mit eingeschaltetem LFO Repeat nur solange, wie eine Taste gedrückt ist. Schalten Sie Auto Repeat ein, um Hüllkurven mit LFO Repeat endlos zu wiederholen.
Der Configuration-Strip Der Configuration Strip ist für besondere System-Einstellungen, Presetverwaltung und Anzeigeelemente vorgesehen. MATCH Diese Anzeige erlaubt es Ihnen, die bei einem gewählten Preset eingestellten Werte abzuholen bzw. einzustellen. Drehen Sie solange an dem neben der Anzeige befindlichen Drehregler, bis die mittlere LED (PRESET) blinkt. Ist Ihr eingestellter Wert kleiner als der Wert im Preset, leuchtet eine der ersten drei LEDs (links).
MIDI Channel Betätigen Sie den Taster CHANNEL, um den gewünschten MIDIKanal mit den DOWN/UP-Tastern oder dem Datenrad einzustellen. Steht ein vertikaler kleiner Strich vor der Kanalzahl, empfängt das Gerät auf allen MIDI-Kanälen (Omni-Mode). Gesendet wird auf dem eingestellten Kanal. Ohne Strich wird nur auf dem eingestellten Kanal gesendet und empfangen. Wertebereich: MIDI Kanal 1 ... 16 Omni Off MIDI Kanal |1 ...
Preset, User Store Betätigen Sie den Taster PRESET, um das gewünschte Preset mit den DOWN/UP-Tastern oder dem Datenrad zu wählen. Ein Preset beinhaltet alle Einstellungen, die Parameter der „Add Page“ der Remotesoftware und somit auch die Effekte. Presets können nur in die User-Bank gespeichert werden, deshalb wird USER automatisch selektiert, wenn ein Preset gespeichert werden soll. Betätigen Sie den Taster USER, um zwischen Factory- und UserBank hin- und herzuschalten.
Die Effektprogramme: PARAMETER 1 PARAMETER 2 PARAMETER 3 Chorus Chorus Depth Chorus Rate Chorus Feedback Delay Time Delay Damping Delay Time Left Delay Time Right Delay BPM Delay BPM Delay Note Left Delay Note Right Chorus Delay Time Chorus Depth Delay Time Left Delay Time Right Chorus Delay BPM Delay BPM Delay Note Left Delay Note Right Die Wertebereiche der Parameter: C ontrol R ange C horus D epth C horus R ate C horus Feedback D elay Time D elay B P M 0 - 10 0.01 Hz - 20 Hz -5 ..
PRODYSSEY ASB Remote Software Allgemeines Um den Prodyssey durch die Remote-Software steuern zu können, muss der Prodyssey über USB oder MIDI mit dem Computer verbunden sein. Da beim ersten Start der notwendige MIDI-Treiber noch nicht eingestellt ist, kommt es zu Fehlermeldungen. Quittieren Sie diese mit „OK“ und stellen Sie auf der Prefs-Page den verwendeten Treiber und den MIDI-Kanal für Ein- und Ausgang ein. Der USB-Treiber des Prodyssey erscheint als USB Audiogerät.
Die Bedienung im Einzelnen MAIN PAGE In der Remote-Software gibt es zu den bereits beschriebenen Parametern des Hardware-Panels zwei Unterschiede. Global Octave Links unterhalb des Noise-Schalters befindet sich ein weiterer Schalter für die Oktavlage. Mit diesem Schalter können Sie die Oktavlage des gesamten Gerätes beeinflussen. AR/ADSR Velocity Auf dem Hardware-Panel lassen sich beide Parameter lediglich gemeinsam steuern.
ADD PAGE Additional Features Bend Range Stellen Sie hier die maximale Verstimmung durch Pitchbend in Halbtönen ein. Der Wertebereich beträgt 0 bis 24 Halbtöne. Modulation Intensity Maximale Intensität der zuschaltbaren Modulationen auf Oszillatoren und Filter, die durch das Modulationsrad bestimmt werden kann. BPM Nehmen Sie hier Einstellungen zum MIDI-Tempo vor. KEYBOARD MODE Low Note On Schaltet die Low-Note-Priority ein, d.h. tiefe Töne haben gegenüber hohen Vorrang.
Retrig On Schaltet den Trigger-Modus der Hüllkurven von Legato auf Retrigger um. Ist Retrig eingeschaltet, wird beim Legatospiel die Hüllkurve jedesmal von neuem gestartet. Bei abgeschaltetem Retrig werden beim Legatospiel die Noten gebunden wiedergegeben, ohne Neustart der Hüllkurve. Single On Schaltet, egal wie viele Stimmen geladen sind, die Stimmenverwaltung des Instruments auf eine Stimme. Die korrekte Wiedergabe von Solo-Sounds mit Portamento wird somit garantiert.
EFFECTS (Chorus/Delay) Die Add-Page beinhaltet Bedienelemente für den eingebauten Chorus/Flanger und für den Delay-Effekt Ihres ASB. CHORUS/FLANGER Chorus/Flanger Wählen Sie hier zwischen Chorus und Flanger Algorithmus. Rate regelt den Wert Modulationsgeschwindigkeit. Depth Hier können Sie die Intensität der Modulation einstellen. Phase Stellen sie hier die Phase der Modulation ein. Feedback Regelt die Intensität der Rückkopplung ein. Dry/Wet Regelt den Effektanteil.
Feedback regelt den Anteil an Rückkopplung im Delayweg. In der Praxis wirkt sich dieser Parameter auf die Anzahl an Echos aus. Damp Hier wird die Intensität der Höhendämpfung eingestellt. Level Level regelt die Lautstärke unabhängig für den linken und rechten Kanal. Tempo Hier können Sie den Wert für das Delay-Tempo in BPM eingeben. Dry/Wet Regelt den Effektanteil.
PREFS PAGE Hier ändern Sie Systemeinstellungen des PRODYSSEY ASB. MIDI IN Device Wählen Sie hier den Eingangsport, an dem Ihr ASB angeschlossen ist. Für diese Verbindung kann ein MIDI-Port Ihres Rechners, oder die USB-Verbindung verwendet werden. Channel Wählen Sie hier den Midikanal, über welchen Sie Ihren ASB ansteuern möchten. (Wählbar bei MIDI In und MIDI Out) MIDI OUT Hier können Sie die Einstellungen für den MIDI-Ausgang Ihres ASB konfigurieren.
Firmware Update Die Installation aktueller Firmware Ihres PRODYSSEY ASB ist innerhalb der Firmware-Sektion möglich. Activation Key Tragen Sie hier den Aktivierungsschlüssel Ihres PRODYSSEY ASB ein. Sie erhalten Ihn, falls notwendig, von unserem Support. DSP Software Hier wird die Version der aktuell verwendeten klangerzeugenden Software angezeigt. Firmware Source File Zeigt Ihnen die von Ihnen ausgewählte Update-Datei an. Browse Wählen Sie hier den Ort, an dem sich die Datei mit dem Update befindet.
MIDI MONITOR Der MIDI-Monitor zeigt ein- und ausgehende MIDI-Nachrichten an. Clear Löscht die Anzeige des MIDI-Monitors.
MIDI KEYBOARD Das MIDI-Keyboard ermöglicht es Ihnen, auch ohne Sequencer oder Keyboard Klänge des Prodyssey mit der Maus zu spielen. Sie erreichen MIDI-Keyboard und MIDI-Monitor über den entsprechenden Button der Remote Software. Channel Hier wird der MIDI-Kanal eingestellt, auf dem gesendet werden soll. Octave stellt den spielbaren Notenbereich in Oktavschritten ein.
Presetverwaltung Die Presetverwaltung der Remote-Software ermöglicht das Speichern, Austauschen und Editieren von eigenen Presets. Open Presetlist Öffnet die Presetliste. Open File Öffnet ein Preset-File. Sie können die Presetliste als Datei speichern, um sie mit anderen Usern auszutauschen oder um Sicherungskopien anzufertigen. Der Erweiterung der Presetdatei ist *.PDY. Mit den Pfeilen neben dem Preset-Knopf können sie durch die Presets "steppen".
Upload User Bank to Box Überträgt Daten der User-Bank von der Remote-Software auf den ASB. Upload Faktory Bank to Box Überträgt Daten der Factory-Bank von der Remote-Software auf den ASB. Upload Use Bank from Box Überträgt die Daten der User-Bank von Ihrem ASB zur RemoteSoftware. Upload Faktory Bank from Box Überträgt Daten der Factory-Bank von Ihrem ASB zur RemoteSoftware.
Technische Daten Technologie Physical Modelling, Virtual Circuit Modelling Stimmenanzahl 12 Stimmen Sampling Rate 44.1 kHz (internes oversampling) Auflösung 32 bit (Audio) Analoger Eingang 6,3mm Klinke, asymmetrisch Analoger Ausgang 6,3mm Klinke, asymmetrisch Controller Eingänge Pedal, Switch MIDI In, Out, Thru USB Full Speed USB rev 1.1 Netzteil AC oder DC, 12V, 1.
Gewährleistungsbestimmungen Für die Hardware des beschriebenen Produktes gelten die gesetzlichen Bestimmungen zur Produktmängelhaftung der Bundesrepublik Deutschland. Die CreamWare Audio GmbH (“CreamWare”) gewährleistet für das beschriebene Produkt, dass es bei der Herstellung frei von Material- und Herstellungsmängeln ist. Hierfür wurde jedes einzelne Gerät von unserer Qualitätssicherung vielfach und sorgfältig getestet, bevor es ausgeliefert wurde.
CreamWare Audio GmbH Am Turm 11 - 13 53721 Siegburg Germany Register HRB 5804, AG Siegburg VAT-ID: DE813874968 Tel.: +49 2241 59 58 0 Fax +49 2241 59 58 57 www.creamware.de www.creamware.