User Manual

18
Release
The fourth segment of the envelope. In the release phase the enve-
lope falls back to zero.
AR Velocity/ADSR Velocity
This setting modulates all envelope levels in
response to velocity. Depending on the sel-
ected modulation level the envelope levels
can vary between minimum and maximum
according to these settings. The velocity af-
fects the assigned modulation.
KEYB Repeat/Auto Repeat
The PRODYSSEY’s envelopes can be triggered either manually by
playing notes (via Keyboard Gate) or automatically by the LFO (via
LFO Repeat). When Keyboard Gate is activated you can play nor-
mally on the keyboard. The envelope is triggered by playing a note
on the keyboard, and letting go of the note releases the envelope.
Activating LFO Repeat repeats the envelope at the LFO’s tempo.
The LFO’s rising edge starts the envelope and the falling edge
closes the envelope according to the selected release time. You
can alter the LFO speed and selected envelope times to create a
variety of envelope shapes.
Activating Keyboard Repeat makes it possible to listen to the result
only when pressing a note on the keyboard. Activating LFO and
Auto-Repeat triggers the envelopes from the LFO.
ADSR KEYB Gate/LFO Repeat
This is where you select the trigger mode for the ADSR envelope.
AR KEYB Gate/LFO Repeat
This is where you select the trigger mode for the AR envelope.
KEYB Repeat/Auto Repeat
Enabling LFO Repeat and Keyboard Repeat
will cause envelopes to repeat for the durati-
on that a note is held. Enabling Auto Repeat
with LFO Repeat will cause envelopes to
repeat endlessly.