User Manual

6
Getting started
Making Connections
Connecting the power adaptor
To connect your PRODYSSEY ASB to a mains supply, please use
the power adaptor supplied with the unit. First connect the power
adaptor to your PRODYSSEY ASB. Before plugging the adaptor's
plug into a mains socket, make sure it is compatible with the mains
voltage in your country. If you lose the power supply, a standard AC
or DC 12V / 1.5A power adaptor can be used as a replacement. The
PRODYSSEY ASB's power socket requires a hollow plug (5.5 mm x
2.1mm x 11.5 mm, centre positive).
Important Notice:
The only suitable Expression Pedal for your Prodyssey is the
model "Yamaha
TM
FC7" (or 100% compatible). Other models
MUST NOT be connected as these may cause permanent da-
mage to your Prodyssey !
MIDI connections
There are two ways to play your Prodyssey using MIDI:
1. Connect your Prodyssey directly to a master keyboard.
2. Connect your Prodyssey to your computer's MIDI port in
order to use it with a sequencer or with the Prodyssey's
Remote Software.
Connect the MIDI in and out of your PRODYSSEY ASB to the MIDI
in and out of your keyboard or computer. The MIDI input of your
PRODYSSEY ASB should be connected to the MIDI output of your
keyboard / computer, and vice versa.
The PRODYSSEY ASB's incoming MIDI signal can also control
another instrument if you connect the PRODYSSEY ASB's 'MIDI thru'
to the instrument's MIDI in. If your computer does not have a MIDI
port, you can use USB connection as an alternative.