User Manual

7
Audio Connections
In order to hear the PRODYSSEY ASB, connect
its stereo outputs to the left / right inputs of a
mixer, a computer sound card or a HiFi system.
You can also process external signals by
plugging an audio sound source into your
PRODYSSEY ASB's input.
Power Switch
This is rather obvious, but in order to activate the
PRODYSSEY ASB please turn the power switch
on!
USB Connections and driver installation (Windows XP)
An alternative to using MIDI to connect your PRODYSSEY ASB to a
computer is to use the built-in USB interface. On a PC, this requires
Windows XP with Service Pack 2; the Mac version supports OS10.4.
After connecting the PRODYSSEY to a computer, Windows will
automatically recognize the PRODYSSEY ASB as an audio USB
instrument. No extra drivers are
required - you can start playing right
away! After starting your sequencer
program (shown here: Cubase SX),
you can use the USB audio
instrument driver as a MIDI port.
Once in a while, under older
versions of Windows XP (before
Service Pack 2), the USB port will
not re-appear on screen after disconnecting the PRODYSSEY ASB.
In this case, please reboot Windows XP. After rebooting, your USB
port should appear again.
Installation of the Remote Software
To install the Remote Software supplied with the PRODYSSEY ASB
on your PC, please put the CD-ROM labelled 'PRODYSSEY ASB'
into the CD-R drive of your computer. The 'Install dialogue' should
then automatically appear on your screen. (If you have de-activated
the automatic start function of your CD-R drive, please start the
installation by double-clicking the file 'setup.exe' on the CD.) On the
first page, please choose the language you'd like to use for the install
procedure and then confirm your choice by pressing the 'Next' button.